Indoor plant cultivation systems are gaining increasing popularity because of their ability to meet the needs of producing food in unfavourable climatic contexts and in urban environments, allowing high yield, high quality, and great efficiency in the use of resources such as water and nutrients. While light is one of the most important environmental factors affecting plant development and morphology, electricity costs can limit the widespread adoption of indoor plant cultivation systems at a commercial scale. LED lighting technologies for plant cultivation are also rapidly evolving, and lamps for indoor cultivation are often designed to optimize their light emissions in the photosynthetically active spectrum (i.e. red and blue), in order to reduce energetic requirements for satisfactory yield. Under these light regimens, however, little information is available in literature about minimum photosynthetic photon flux density (PPFD) for indoor production of leafy vegetables and herbs, while existing literature often adopts light intensities from 100 to 300 μmol m-2 s-1. This study aims at defining the optimal PPFD for indoor cultivation of basil (Ocimum basilicum L.) and lettuce (Lactuca sativa L.), by linking resource use efficiency to physiological responses and biomass production under different light intensities. Basil and lettuce plants were cultivated at 24 °C and 450 μmol mol-1 CO2 under red and blue light (with red:blue ratio of 3) and a photoperiod of 16 h d-1 of light in growth chambers using five PPFD (100, 150, 200, 250 and 300 μmol m-2 s-1, resulting in daily light integrals, DLI, of 5.8, 8.6, 11.5, 14.4 and 17.3 mol m-2 d-1, respectively). A progressive increase of biomass production for both lettuce and basil up to a PPFD of 250 μmol m-2 s-1 was observed, whereas no further yield increases were associated with higher PPFD (300 μmol m-2 s-1). Despite the highest stomatal conductance associated to a PPFD of 250 μmol m-2 s-1 in lettuce and to a PPFD ≥ 200 μmol m-2 s-1 in basil, water use efficiency was maximized under a PPFD ≥ 200 μmol m-2 s-1 in lettuce and PPFD ≥ 250 μmol m-2 s-1 in basil. Energy and light use efficiencies were increased under a PPFD of 200 and 250 μmol m-2 s-1 in lettuce and under a PPFD of 250 μmol m-2 s-1 in basil. Furthermore, in lettuce grown under 250 μmol m-2 s-1 antioxidant capacity, phenolics and flavonoids were higher as compared with plants supplied with PPFD ≤ 150 μmol m-2 s-1. Accordingly, a PPFD of 250 μmol m-2 s-1 seems suitable for optimizing yield and resource use efficiency in red and blue LED lighting for indoor cultivation of lettuce and basil under the prevailing conditions of the used indoor farming set-up.

Pennisi G., Pistillo A., Orsini F., Cellini A., Spinelli F., Nicola S., et al. (2020). Optimal light intensity for sustainable water and energy use in indoor cultivation of lettuce and basil under red and blue LEDs. SCIENTIA HORTICULTURAE, 272, 1-10 [10.1016/j.scienta.2020.109508].

Optimal light intensity for sustainable water and energy use in indoor cultivation of lettuce and basil under red and blue LEDs

Pennisi G.;Pistillo A.;Orsini F.;Cellini A.;Spinelli F.;Gianquinto G.;
2020

Abstract

Indoor plant cultivation systems are gaining increasing popularity because of their ability to meet the needs of producing food in unfavourable climatic contexts and in urban environments, allowing high yield, high quality, and great efficiency in the use of resources such as water and nutrients. While light is one of the most important environmental factors affecting plant development and morphology, electricity costs can limit the widespread adoption of indoor plant cultivation systems at a commercial scale. LED lighting technologies for plant cultivation are also rapidly evolving, and lamps for indoor cultivation are often designed to optimize their light emissions in the photosynthetically active spectrum (i.e. red and blue), in order to reduce energetic requirements for satisfactory yield. Under these light regimens, however, little information is available in literature about minimum photosynthetic photon flux density (PPFD) for indoor production of leafy vegetables and herbs, while existing literature often adopts light intensities from 100 to 300 μmol m-2 s-1. This study aims at defining the optimal PPFD for indoor cultivation of basil (Ocimum basilicum L.) and lettuce (Lactuca sativa L.), by linking resource use efficiency to physiological responses and biomass production under different light intensities. Basil and lettuce plants were cultivated at 24 °C and 450 μmol mol-1 CO2 under red and blue light (with red:blue ratio of 3) and a photoperiod of 16 h d-1 of light in growth chambers using five PPFD (100, 150, 200, 250 and 300 μmol m-2 s-1, resulting in daily light integrals, DLI, of 5.8, 8.6, 11.5, 14.4 and 17.3 mol m-2 d-1, respectively). A progressive increase of biomass production for both lettuce and basil up to a PPFD of 250 μmol m-2 s-1 was observed, whereas no further yield increases were associated with higher PPFD (300 μmol m-2 s-1). Despite the highest stomatal conductance associated to a PPFD of 250 μmol m-2 s-1 in lettuce and to a PPFD ≥ 200 μmol m-2 s-1 in basil, water use efficiency was maximized under a PPFD ≥ 200 μmol m-2 s-1 in lettuce and PPFD ≥ 250 μmol m-2 s-1 in basil. Energy and light use efficiencies were increased under a PPFD of 200 and 250 μmol m-2 s-1 in lettuce and under a PPFD of 250 μmol m-2 s-1 in basil. Furthermore, in lettuce grown under 250 μmol m-2 s-1 antioxidant capacity, phenolics and flavonoids were higher as compared with plants supplied with PPFD ≤ 150 μmol m-2 s-1. Accordingly, a PPFD of 250 μmol m-2 s-1 seems suitable for optimizing yield and resource use efficiency in red and blue LED lighting for indoor cultivation of lettuce and basil under the prevailing conditions of the used indoor farming set-up.
2020
Pennisi G., Pistillo A., Orsini F., Cellini A., Spinelli F., Nicola S., et al. (2020). Optimal light intensity for sustainable water and energy use in indoor cultivation of lettuce and basil under red and blue LEDs. SCIENTIA HORTICULTURAE, 272, 1-10 [10.1016/j.scienta.2020.109508].
Pennisi G.; Pistillo A.; Orsini F.; Cellini A.; Spinelli F.; Nicola S.; Fernandez J.A.; Crepaldi A.; Gianquinto G.; Marcelis L.F.M.
File in questo prodotto:
File Dimensione Formato  
OrsiniPPoptimal.pdf

accesso aperto

Tipo: Postprint
Licenza: Licenza per Accesso Aperto. Creative Commons Attribuzione - Non commerciale - Non opere derivate (CCBYNCND)
Dimensione 1.11 MB
Formato Adobe PDF
1.11 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/776494
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 128
  • ???jsp.display-item.citation.isi??? 112
social impact