Investigation of the impact of additive manufacturing techniques on the acoustic performance of a coiled-up resonator

Acoustic metamaterials (AMMs) offer innovative solutions for physics and engineering problems, allowing lighter, multiphysics, and sustainable systems. They are usually studied analytically or numerically and then tested on prototypes. For this reason, additive manufacturing (AM) techniques are a popular way of quickly realising AMMs' innovative geometrical designs. However, AM parameters are often standardised without considering the specific issues of each AMM geometrical shape, leading to a possible mismatch between the analytical (or numerical) and experimental results. In this study, a simple AMM-a coiled-up resonator-has been produced with different AM technologies [fused deposition modeling (FDM), stereolithography (SLA), and selective laser melting and materials (polylactic acid, polyethylene terephthalate glycol, resin, flexible resin, and stainless steel). The sound absorption performance of these samples has been measured in two research labs in Italy and compared with the analytical and numerical calculations. This permitted the identification of the best combinations of AM technologies, their setup, and materials matching the expected results. The SLA/resin combination performed better overall; however, cheaper and more easily manageable samples made with FDM and polyethylene terephthalate glycol can achieve the same acoustic performance through the optimal AM printing setup. It is expected that this methodology could also be replicated for other AMMs.