This paper presents a summary of recent progress towards the development and upscaling of an emerging class of electrostatic power take-off (PTO) systems for wave energy converters (WECs), called dielectric elastomer generators (DEGs). DEGs are electromechanical devices able to convert mechanical energy into electrical energy by exploiting the deformation of rubber-like dielectric materials. The high power density (in the order of hundreds of Watts per kilogram), good efficiency and ease of assembling, combined with the low-cost of the employed materials (a few euros per kilogram) and their intrinsic resilient/reliable response to mechanical shocks make DEGs a very promising option for the deployment of a future generation of WECs. In the last decade, some specific concepts of WECs based on DEGs have been devised and a considerable interest in the topic has been aroused in the wave energy community. Among the candidate DEG topologies for wave energy harvesting, recent studies have suggested that a specific layout, namely the axial-symmetric inflating DEG diaphragm, could be a very promising candidate for future upscaling. This paper first describes the operating principle of DEG PTOs and the effect of electro-mechanical material parameters on their energetic performance. With reference to the above-mentioned inflating DEG diaphragm topology, an overview of concepts for integration on WECs is then provided, with a special focus on advanced concepts enabling the achievement of dynamical tuning with the incoming waves. A general lumped-parameter modelling approach for the design of DEG-based WECs is proposed. Experimental activity carried out to date, i.e. dry-run laboratory tests, wave-tank tests and preliminary sea trials is reviewed, with the aim of showing the progression in the device's scale and performance. Finally, economical and technological considerations are outlined, in order to point out challenges, future research opportunities and to draft a roadmap for future research and technological transfer.

Moretti G., Santos Herran M., Forehand D., Alves M., Jeffrey H., Vertechy R., et al. (2020). Advances in the development of dielectric elastomer generators for wave energy conversion. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 117, 1-17 [10.1016/j.rser.2019.109430].

Advances in the development of dielectric elastomer generators for wave energy conversion

Vertechy R.;
2020

Abstract

This paper presents a summary of recent progress towards the development and upscaling of an emerging class of electrostatic power take-off (PTO) systems for wave energy converters (WECs), called dielectric elastomer generators (DEGs). DEGs are electromechanical devices able to convert mechanical energy into electrical energy by exploiting the deformation of rubber-like dielectric materials. The high power density (in the order of hundreds of Watts per kilogram), good efficiency and ease of assembling, combined with the low-cost of the employed materials (a few euros per kilogram) and their intrinsic resilient/reliable response to mechanical shocks make DEGs a very promising option for the deployment of a future generation of WECs. In the last decade, some specific concepts of WECs based on DEGs have been devised and a considerable interest in the topic has been aroused in the wave energy community. Among the candidate DEG topologies for wave energy harvesting, recent studies have suggested that a specific layout, namely the axial-symmetric inflating DEG diaphragm, could be a very promising candidate for future upscaling. This paper first describes the operating principle of DEG PTOs and the effect of electro-mechanical material parameters on their energetic performance. With reference to the above-mentioned inflating DEG diaphragm topology, an overview of concepts for integration on WECs is then provided, with a special focus on advanced concepts enabling the achievement of dynamical tuning with the incoming waves. A general lumped-parameter modelling approach for the design of DEG-based WECs is proposed. Experimental activity carried out to date, i.e. dry-run laboratory tests, wave-tank tests and preliminary sea trials is reviewed, with the aim of showing the progression in the device's scale and performance. Finally, economical and technological considerations are outlined, in order to point out challenges, future research opportunities and to draft a roadmap for future research and technological transfer.
2020
Moretti G., Santos Herran M., Forehand D., Alves M., Jeffrey H., Vertechy R., et al. (2020). Advances in the development of dielectric elastomer generators for wave energy conversion. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 117, 1-17 [10.1016/j.rser.2019.109430].
Moretti G.; Santos Herran M.; Forehand D.; Alves M.; Jeffrey H.; Vertechy R.; Fontana M.
File in questo prodotto:
File Dimensione Formato  
RSER_109430_v2.pdf

Open Access dal 23/10/2021

Tipo: Postprint
Licenza: Creative commons
Dimensione 23.95 MB
Formato Adobe PDF
23.95 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/710430
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 55
  • ???jsp.display-item.citation.isi??? 49
social impact