This work numerically investigates the design of a triangular array of obstacles subjected to forced convection, two-dimensional, laminar, unsteady, incompressible flows for five Prandtl numbers: Pr = 0.71, 6.0, 15.0, 25.0, and 50.0. For all cases, Reynolds and Brinkman numbers are constant (Re- D = 100, Br = 0.0625). Constructal design is employed to predict the array configuration. The arrangement is constrained by its occupation area, while the following degrees of freedom are varied: the height-to-length ratio of the upstream obstacle (H 1/L 1), the ratio between transversal and longitudinal pitches, and the side length of the downstream bodies (S T/D and S L/D). The main contribution here is to understand the influence of degrees of freedom (DOF) on fluid dynamic and thermal behavior, as measured by the drag coefficient (C-D) and the heat transfer rate per unit length (q(-)), across different Pr. The equations of continuity, momentum, and energy conservation are numerically solved using the finite-volume method in the FLUENT software. Under the present conditions and limitations, the design of the arrangement to maximize was affected in the range 0.6 <= Pr <= 6.0, followed by stability for Pr > 6.0. For fluid dynamics purposes, the optimal configurations remained the same across different Pr. The design was guided by the interactions of thermal boundary layers, momentum around the obstacles, and flow structures generated behind the frontal body.
De Ávila Barreto, G., Dos Santos, A.L., Biserni, C., Teixeira, F.B., Gonçalves, R.A.A.C., Isoldi, L.A., et al. (2026). Computational assessment of triangular bluff body shapes in forced convection across different Prandtl numbers. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 48(14), 1-20 [10.1007/s40430-026-06983-6].
Computational assessment of triangular bluff body shapes in forced convection across different Prandtl numbers
Biserni C.
;
2026
Abstract
This work numerically investigates the design of a triangular array of obstacles subjected to forced convection, two-dimensional, laminar, unsteady, incompressible flows for five Prandtl numbers: Pr = 0.71, 6.0, 15.0, 25.0, and 50.0. For all cases, Reynolds and Brinkman numbers are constant (Re- D = 100, Br = 0.0625). Constructal design is employed to predict the array configuration. The arrangement is constrained by its occupation area, while the following degrees of freedom are varied: the height-to-length ratio of the upstream obstacle (H 1/L 1), the ratio between transversal and longitudinal pitches, and the side length of the downstream bodies (S T/D and S L/D). The main contribution here is to understand the influence of degrees of freedom (DOF) on fluid dynamic and thermal behavior, as measured by the drag coefficient (C-D) and the heat transfer rate per unit length (q(-)), across different Pr. The equations of continuity, momentum, and energy conservation are numerically solved using the finite-volume method in the FLUENT software. Under the present conditions and limitations, the design of the arrangement to maximize was affected in the range 0.6 <= Pr <= 6.0, followed by stability for Pr > 6.0. For fluid dynamics purposes, the optimal configurations remained the same across different Pr. The design was guided by the interactions of thermal boundary layers, momentum around the obstacles, and flow structures generated behind the frontal body.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.



