Power Consumption and Fluid Mixing in a Scale-Down Geometry of a Stirred Digester for Biogas Production

A non conventional stirred tank of geometry typically adopted for the production of biogas is experimentally investigated with pseudo-plastic model fluids. The apparent viscosities of the fluids, based on the Metzner-Otto method, is in the range 39-264 mPa·s, resulting in a range of rotational Reynolds number equal to 17-648. The power consumption of the three top-entering agitators is measured by a strain gauge technique and the power number curve is obtained in the full range of flow regimes, going from laminar to fully turbulent conditions. The flow field measured by Particle Image Velocimetry allows to observe the fluid circulation patterns and their variations in different operative conditions. The measurements reveal relatively low axial and radial velocities, especially towards the bottom of the tank, that may hinder solid feedstocks suspension and the subsequent biogas production. Significant changes in the flow patterns are observed with small variations of the impeller speed and of the mixture viscosity. The homogenization dynamics of a tracer obtained by Planar Laser Induced Fluorescence leads to estimate the dimensionless mixing time, which trend is found to be similar to that observed for conventional stirred vessel geometries. The detailed fluid dynamics information collected by a combination of different techniques can contribute to optimize the energy requirement and to avoid failure of the biogas production due to poor fluid mixing.