This paper describes the development of a low-cost device for measuring the acoustic intrinsic characteristics of noise barriers. The system is based on the Teensy 4.1 microcontroller combined with a few other components. The measurements are carried out using a vertical linear microphone antenna housing 6 microphones and a lightweight loudspeaker, wireless connected to the main unit. Both the main system unit and the amplified loudspeaker are powered from normal 5 V USB battery packs, which are easily rechargeable and interchangeable. The system measures 6 impulse responses using an MLS signal and performs a series of calculations and frequency analyses to characterize the device under test, following a simplified version of the European standards EN 1793-5 and EN 1793-6 (commonly referred to as the ’Adrienne method’). One measurement takes few minutes, obtaining results comparable to those obtained with the Adrienne method, which requires a more complicated and heavy measuring equipment and is much more expensive and time consuming.
Guidorzi P., Garai M. (2022). A Low-Cost System for Quick Measurements on Noise Barriers in Situ. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 71, 1-14 [10.1109/TIM.2022.3218037].
A Low-Cost System for Quick Measurements on Noise Barriers in Situ
Guidorzi P.
Primo
Writing – Original Draft Preparation
;Garai M.Secondo
Writing – Review & Editing
2022
Abstract
This paper describes the development of a low-cost device for measuring the acoustic intrinsic characteristics of noise barriers. The system is based on the Teensy 4.1 microcontroller combined with a few other components. The measurements are carried out using a vertical linear microphone antenna housing 6 microphones and a lightweight loudspeaker, wireless connected to the main unit. Both the main system unit and the amplified loudspeaker are powered from normal 5 V USB battery packs, which are easily rechargeable and interchangeable. The system measures 6 impulse responses using an MLS signal and performs a series of calculations and frequency analyses to characterize the device under test, following a simplified version of the European standards EN 1793-5 and EN 1793-6 (commonly referred to as the ’Adrienne method’). One measurement takes few minutes, obtaining results comparable to those obtained with the Adrienne method, which requires a more complicated and heavy measuring equipment and is much more expensive and time consuming.File | Dimensione | Formato | |
---|---|---|---|
low cost system post print .pdf
accesso aperto
Tipo:
Postprint
Licenza:
Licenza per accesso libero gratuito
Dimensione
6.63 MB
Formato
Adobe PDF
|
6.63 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.