A laser scanning-based method for fast estimation of seismic-induced building deformations

Monitoring damaged buildings in an area where an earthquake has occurred requires the use of techniques which provide rapid and safe measurements even in emergency conditions. In particular, remote sensing techniques like terrestrial laser scanning (TLS) can satisfy these requirements, since they produce very dense point clouds in little time and also allow an accurate geometric modeling of observed buildings. Nevertheless, strong constraints on TLS data acquisition geometry, such as acquisition distance and incidence angles, typically characterize an area in seismic emergency conditions. In order to correctly interpret the data, it is necessary to estimate errors affecting TLS measurements in these critical conditions. A reliable estimation can be achieved by means of experiments and numerical simulations aimed at quantifying a realistic noise level, with emphasis on reduction of artifacts due to data acquisition, registration and modeling. This paper proposes a data analysis strategy in which TLS-based morphological maps computed as point-to-primitive differences are created. The method can be easily used for accurate surveying in emergency conditions. In order to demonstrate the proposed method in very diverse situations, it was applied to rapidly detect deformation traces in the San Giacomo Roncole Campanile (Modena), the Asinelli tower (Bologna) and the Cantalovo Church (Verona), three buildings damaged by the Mw 5.9 Emilia Romagna 2012 earthquake (Italy). © 2013 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).