New nanostructured insulating materials are investigated, within the European project GRIDABLE, to be used for DC cable and capacitors. Besides electrical, thermal and mechanical properties, and life behavior, work is being done to evaluate their capability to endure highly stressing conditions as those cause by the inception of partial discharges, PD. This paper, in particular, analyzes what happens during energization of a DC cable or capacitors, when voltage goes from zero to the nominal value in a few seconds, while the internal electrical field takes longer time to reach the DC steady state configuration. During an energization transient, indeed, electrical field in insulation, and insulation defects (as cavities), is driven by permittivity, not conductivity as in steady state. Hence, PD might occur with high repetition rate, which would not occur, or at much lower repetition rate, in steady state. The way to evaluate the time constant of the transient, that is, through charging current measurement, is described and successfully fitted to the results of PD measurements performed on two types of polypropylene, PP: neat and nanostructured, and a crosslinked polyethylene, XLPE, having significantly different electrical characteristics.
Seri P., Ghosh R., Naderiallaf H., Montanari G.C. (2019). Investigating Energization Transients and the Potentiality of Partial Discharge Inception and Damage in Nanofilled Polypropylene Insulation for DC Cables and Capacitors. 345 E 47TH ST, NEW YORK, NY 10017 USA : Institute of Electrical and Electronics Engineers Inc. [10.1109/CATCON47128.2019.42].
Investigating Energization Transients and the Potentiality of Partial Discharge Inception and Damage in Nanofilled Polypropylene Insulation for DC Cables and Capacitors
Seri P.;Ghosh R.;Naderiallaf H.;Montanari G. C.
2019
Abstract
New nanostructured insulating materials are investigated, within the European project GRIDABLE, to be used for DC cable and capacitors. Besides electrical, thermal and mechanical properties, and life behavior, work is being done to evaluate their capability to endure highly stressing conditions as those cause by the inception of partial discharges, PD. This paper, in particular, analyzes what happens during energization of a DC cable or capacitors, when voltage goes from zero to the nominal value in a few seconds, while the internal electrical field takes longer time to reach the DC steady state configuration. During an energization transient, indeed, electrical field in insulation, and insulation defects (as cavities), is driven by permittivity, not conductivity as in steady state. Hence, PD might occur with high repetition rate, which would not occur, or at much lower repetition rate, in steady state. The way to evaluate the time constant of the transient, that is, through charging current measurement, is described and successfully fitted to the results of PD measurements performed on two types of polypropylene, PP: neat and nanostructured, and a crosslinked polyethylene, XLPE, having significantly different electrical characteristics.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
