In the present paper, we develop a numerical analysis supporting the design of a climatic chamber suitable for tracked and wheeled tractors, i.e. having measures 5x8x4 m3 (length x width x height).. The numerical analysis is performed by employing Matlab-Simulink, to simulate the behavior of transient systems. First, the balance equations are written with reference to the 5 blocks that can describe the climatic chamber. Then two different regimes are investigated. First, a period of 10 hours is considered in order to reach the prescribed conditions for the climatic chamber. Then, after this preparation period, the tractor’s engine is supposed to work. The performed analysis has shown that higher values of the adduction coefficient are preferable. Moreover, the dynamical analysis turned out to be a very useful instrument to drive the design.

Eugenia Rossi di Schio*, P.V. (2018). A numerical model for the design of a climatic chamber.

A numerical model for the design of a climatic chamber

Eugenia Rossi di Schio
Membro del Collaboration Group
;
Paolo Valdiserri;Valda Rondelli;Enrico Capacci;
2018

Abstract

In the present paper, we develop a numerical analysis supporting the design of a climatic chamber suitable for tracked and wheeled tractors, i.e. having measures 5x8x4 m3 (length x width x height).. The numerical analysis is performed by employing Matlab-Simulink, to simulate the behavior of transient systems. First, the balance equations are written with reference to the 5 blocks that can describe the climatic chamber. Then two different regimes are investigated. First, a period of 10 hours is considered in order to reach the prescribed conditions for the climatic chamber. Then, after this preparation period, the tractor’s engine is supposed to work. The performed analysis has shown that higher values of the adduction coefficient are preferable. Moreover, the dynamical analysis turned out to be a very useful instrument to drive the design.
2018
13 conference on sustainable development of energy, water, and environment systems
204
204
Eugenia Rossi di Schio*, P.V. (2018). A numerical model for the design of a climatic chamber.
Eugenia Rossi di Schio*, Paolo Valdiserri, Valda Rondelli, Enrico Capacci, Stefano Masi
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/673221
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact