This paper proposes the design and experimental validations of a 6.78 MHz IR-WPT with one conformal transmitter (Tx) and a couple of receiver (Rx) coils, suitable for powering implantable devices. The Rx coils are arranged in such a way that quasi-constant dc-output voltage and conversion efficiency are obtained, regardless of the receiver rotation, with respect to the transmitter. A 3-D miniaturized receiver, consisting of two elliptical coils wrapped around a capsule and orthogonal to each other, is faced to a conformal transmitter designed to maximize the magnetic flux in the receiver region. In order to avoid dark areas for energy transfer, due to unknown capsule rotations, each Rx coil is connected to one rectifier and the dc output ports are series-connected.

Design of a RF-to-dc Link for in-body IR-WPT with a Capsule-shaped Rotation-insensitive Receiver / Pacini, Alex; Benassi, Francesca; Masotti, Diego; Costanzo, Alessandra. - ELETTRONICO. - (2018), pp. 8439499.1289-8439499.1292. (Intervento presentato al convegno 2018 IEEE/MTT-S International Microwave Symposium, IMS 2018 tenutosi a Philadephia (PA) nel 10-15 June, 2018) [10.1109/MWSYM.2018.8439499].

Design of a RF-to-dc Link for in-body IR-WPT with a Capsule-shaped Rotation-insensitive Receiver

Pacini, Alex;Benassi, Francesca;Masotti, Diego;Costanzo, Alessandra
2018

Abstract

This paper proposes the design and experimental validations of a 6.78 MHz IR-WPT with one conformal transmitter (Tx) and a couple of receiver (Rx) coils, suitable for powering implantable devices. The Rx coils are arranged in such a way that quasi-constant dc-output voltage and conversion efficiency are obtained, regardless of the receiver rotation, with respect to the transmitter. A 3-D miniaturized receiver, consisting of two elliptical coils wrapped around a capsule and orthogonal to each other, is faced to a conformal transmitter designed to maximize the magnetic flux in the receiver region. In order to avoid dark areas for energy transfer, due to unknown capsule rotations, each Rx coil is connected to one rectifier and the dc output ports are series-connected.
2018
IEEE MTT-S International Microwave Symposium Digest
1289
1292
Design of a RF-to-dc Link for in-body IR-WPT with a Capsule-shaped Rotation-insensitive Receiver / Pacini, Alex; Benassi, Francesca; Masotti, Diego; Costanzo, Alessandra. - ELETTRONICO. - (2018), pp. 8439499.1289-8439499.1292. (Intervento presentato al convegno 2018 IEEE/MTT-S International Microwave Symposium, IMS 2018 tenutosi a Philadephia (PA) nel 10-15 June, 2018) [10.1109/MWSYM.2018.8439499].
Pacini, Alex; Benassi, Francesca; Masotti, Diego; Costanzo, Alessandra
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/643390
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 4
social impact