The paper discusses the release and air dispersion modelling for the specific potential accident scenario case of a vertical impinging jet of propane (below the sun shade/rain roof) out of an over-filled car tanker. The main purpose was to assess the related uncertainties in impact distances downwind to the Lower Flammability Limit (LFL) and half the LFL (LFL/2) propane concentrations in the ambient air, due to the proximity of the site border (issue of the control over the ignition sources). The conventional Unified Dispersion Modelling (UDM) results were re-modelled using a dynamic process simulation (to simulate the pressure safety release valve) and dispersion modelling using a Computational Fluid Dynamic (CFD) model simulation. The CFD model enabled explicit consideration of the 3D objects and impinging jet. The comparison of the impact distances down to LFL and LFL/2 concentrations among UDM and CFD models revealed that the CFD model suggests the distances are about 2-3 times shorter, but the fire hazard (propane-air mixture) is present for approximately twice the time after cessation of the propane release. This means that conventional UDM derived results using the integrated models are to some extent conservative, while on the other hand, the duration of the fire hazard is underestimated. The results are important for risk analysts in terms of the consideration of the use of the UDM models out of the validated contexts (e.g., vertical impinging, obstacles), as well as for site managers in considering whether the ignition prevention measures (separation distances) are sufficient.

Comparison of UDM and CFD simulations of a time varying release of LPG in geometrical complex environment

ANTONIONI, GIACOMO;TUGNOLI, ALESSANDRO;COZZANI, VALERIO;
2017

Abstract

The paper discusses the release and air dispersion modelling for the specific potential accident scenario case of a vertical impinging jet of propane (below the sun shade/rain roof) out of an over-filled car tanker. The main purpose was to assess the related uncertainties in impact distances downwind to the Lower Flammability Limit (LFL) and half the LFL (LFL/2) propane concentrations in the ambient air, due to the proximity of the site border (issue of the control over the ignition sources). The conventional Unified Dispersion Modelling (UDM) results were re-modelled using a dynamic process simulation (to simulate the pressure safety release valve) and dispersion modelling using a Computational Fluid Dynamic (CFD) model simulation. The CFD model enabled explicit consideration of the 3D objects and impinging jet. The comparison of the impact distances down to LFL and LFL/2 concentrations among UDM and CFD models revealed that the CFD model suggests the distances are about 2-3 times shorter, but the fire hazard (propane-air mixture) is present for approximately twice the time after cessation of the propane release. This means that conventional UDM derived results using the integrated models are to some extent conservative, while on the other hand, the duration of the fire hazard is underestimated. The results are important for risk analysts in terms of the consideration of the use of the UDM models out of the validated contexts (e.g., vertical impinging, obstacles), as well as for site managers in considering whether the ignition prevention measures (separation distances) are sufficient.
2017
Gerbec, M.; Pontiggia, M.; Antonioni, G.; Tugnoli, A.; Cozzani, V.; Sbaouni, M.; Lelong, R.
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/581674
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 20
  • ???jsp.display-item.citation.isi??? 19
social impact