A feasibility study was performed in order to demonstrate the benefits of designing and manufacturing a customized foot orthosis by means of digital technologies, such as Reverse Engineering (RE), Generative Design (GD) and Additive Manufacturing (AM). The aim of this work was to define the complete design-manufacturing process, starting from the 3D scanning of the human foot anatomy to the direct fabricating of the customized foot orthosis. Moreover, this first methodological study tries to combine a user-friendly semi-automatic modelling approach with the use of low-cost devices for the 3D laser scanning and the 3D printing processes. Finally, the result of this approach, based on digital technologies, was also compared with that achieved by means of conventional manual techniques

Fantini, M., De Crescenzio, F., Brognara, L., Baldini, N. (2017). Design and Rapid Manufacturing of a customized foot orthosis: a first methodological study. Springer International Publishing [10.1007/978-3-319-45781-9_46].

Design and Rapid Manufacturing of a customized foot orthosis: a first methodological study

DE CRESCENZIO, FRANCESCA;BROGNARA, LORENZO;BALDINI, NICOLA
2017

Abstract

A feasibility study was performed in order to demonstrate the benefits of designing and manufacturing a customized foot orthosis by means of digital technologies, such as Reverse Engineering (RE), Generative Design (GD) and Additive Manufacturing (AM). The aim of this work was to define the complete design-manufacturing process, starting from the 3D scanning of the human foot anatomy to the direct fabricating of the customized foot orthosis. Moreover, this first methodological study tries to combine a user-friendly semi-automatic modelling approach with the use of low-cost devices for the 3D laser scanning and the 3D printing processes. Finally, the result of this approach, based on digital technologies, was also compared with that achieved by means of conventional manual techniques
2017
Advances on Mechanics, Design Engineering and Manufacturing, Lecture Notes in Mechanical Engineering
457
467
Fantini, M., De Crescenzio, F., Brognara, L., Baldini, N. (2017). Design and Rapid Manufacturing of a customized foot orthosis: a first methodological study. Springer International Publishing [10.1007/978-3-319-45781-9_46].
Fantini, M.; De Crescenzio, F.; Brognara, L.; Baldini, N.
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/570085
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 12
  • ???jsp.display-item.citation.isi??? 9
social impact