Femtosecond laser-based Nonlinear Laser Lithography (NLL) was applied to AISI 316L stainless steel, which requires surface modification to achieve satisfactory tribological behaviour. NLL advances over the well-known Laser Induced Periodic Surface Structures (LIPSS) in terms of uniformity and long-range order of high speeds, over large areas. A galvanometric scanner head was used for an high production rate. Dry and lubricated sliding tests, considering different orientations of the nanotexture showed that COF values after NLL treatment are significantly lower. In lubricated tests, COF values of NLL-treated surfaces are nearly half the values of untreated surfaces, whereas the difference further increases when measured in dry conditions, where the orientation of the surface texturing influences the results.

Nano patterning of AISI 316L stainless steel with Nonlinear Laser Lithography: Sliding under dry and oil-lubricated conditions / Gnilitskyi, Iaroslav; Rotundo, Fabio; Martini, Carla; Pavlov, Ihor; Ilday, Serim; Vovk, Evgeny; Ilday, Fatih Ömer; Orazi, Leonardo. - In: TRIBOLOGY INTERNATIONAL. - ISSN 0301-679X. - STAMPA. - 99:(2016), pp. 67-76. [10.1016/j.triboint.2016.03.011]

Nano patterning of AISI 316L stainless steel with Nonlinear Laser Lithography: Sliding under dry and oil-lubricated conditions

MARTINI, CARLA;
2016

Abstract

Femtosecond laser-based Nonlinear Laser Lithography (NLL) was applied to AISI 316L stainless steel, which requires surface modification to achieve satisfactory tribological behaviour. NLL advances over the well-known Laser Induced Periodic Surface Structures (LIPSS) in terms of uniformity and long-range order of high speeds, over large areas. A galvanometric scanner head was used for an high production rate. Dry and lubricated sliding tests, considering different orientations of the nanotexture showed that COF values after NLL treatment are significantly lower. In lubricated tests, COF values of NLL-treated surfaces are nearly half the values of untreated surfaces, whereas the difference further increases when measured in dry conditions, where the orientation of the surface texturing influences the results.
2016
Nano patterning of AISI 316L stainless steel with Nonlinear Laser Lithography: Sliding under dry and oil-lubricated conditions / Gnilitskyi, Iaroslav; Rotundo, Fabio; Martini, Carla; Pavlov, Ihor; Ilday, Serim; Vovk, Evgeny; Ilday, Fatih Ömer; Orazi, Leonardo. - In: TRIBOLOGY INTERNATIONAL. - ISSN 0301-679X. - STAMPA. - 99:(2016), pp. 67-76. [10.1016/j.triboint.2016.03.011]
Gnilitskyi, Iaroslav; Rotundo, Fabio; Martini, Carla; Pavlov, Ihor; Ilday, Serim; Vovk, Evgeny; Ilday, Fatih Ömer; Orazi, Leonardo
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/566880
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 38
  • ???jsp.display-item.citation.isi??? 33
social impact