Induction motor drives supplied from diode front-end rectifiers are commonly used in industrial applications due to their low cost and reliability. However, the two-quadrant operation of such a topology makes the regenerative braking impossible. Braking resistors can be used to dissipate the braking power and provide enhanced braking capability, but additional hardware is then necessary. Alternatively, the braking power can be dissipated within the inverter/motor by control software reconfiguration. In this scenario, the additional degrees of freedom of multiphase drives can be used to increase the system losses without disturbing the flux and torque production. Simulation results confirm the possibility to enhance the braking capability of the drive with only few changes in the control scheme.

A simple braking method for six-phase induction motor drives with diode front-end rectifier / Mario J. Duran, I. Gonzalez-Prieto; Barrero, F.; Mengoni, M.; Zarri, L.; Levi, E.. - ELETTRONICO. - (2015), pp. 7392320.1542-7392320.1547. (Intervento presentato al convegno 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015 tenutosi a Yokohama, JP nel 9-12 Nov. 2015) [10.1109/IECON.2015.7392320].

A simple braking method for six-phase induction motor drives with diode front-end rectifier

MENGONI, MICHELE;ZARRI, LUCA;
2015

Abstract

Induction motor drives supplied from diode front-end rectifiers are commonly used in industrial applications due to their low cost and reliability. However, the two-quadrant operation of such a topology makes the regenerative braking impossible. Braking resistors can be used to dissipate the braking power and provide enhanced braking capability, but additional hardware is then necessary. Alternatively, the braking power can be dissipated within the inverter/motor by control software reconfiguration. In this scenario, the additional degrees of freedom of multiphase drives can be used to increase the system losses without disturbing the flux and torque production. Simulation results confirm the possibility to enhance the braking capability of the drive with only few changes in the control scheme.
2015
Proc. of IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society
1542
1547
A simple braking method for six-phase induction motor drives with diode front-end rectifier / Mario J. Duran, I. Gonzalez-Prieto; Barrero, F.; Mengoni, M.; Zarri, L.; Levi, E.. - ELETTRONICO. - (2015), pp. 7392320.1542-7392320.1547. (Intervento presentato al convegno 41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015 tenutosi a Yokohama, JP nel 9-12 Nov. 2015) [10.1109/IECON.2015.7392320].
Mario J. Duran, I. Gonzalez-Prieto; Barrero, F.; Mengoni, M.; Zarri, L.; Levi, E.
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/556285
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 7
social impact