The results of single-lap shear tests, conducted on specimens with fiber reinforced cementitious matrix (FRCM) composite strips bonded to concrete blocks, are presented in this paper. The FRCM composite was comprised of polyparaphenylene benzobisoxazole (PBO) fibers and polymer-modified cement-based mortar. This study indicates that in PBO FRCM–concrete joints debonding mainly occurs at the matrix–fiber interface. Friction between fiber filaments and between fibers and matrix is observed after the debonding process initiates. The experimental data suggest that a width effect does not exist among the fiber bundles, and an effective bond length can be defined and is approximately 260 mm. Axial strain profiles along the bonded length are analyzed to investigate the stress-transfer mechanism at the matrix–fiber interface.

T. D’Antino, C. Carloni, L.H. Sneed, C. Pellegrino (2014). Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach. ENGINEERING FRACTURE MECHANICS, 117, 94-111 [10.1016/j.engfracmech.2014.01.011].

Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach

CARLONI, CHRISTIAN;
2014

Abstract

The results of single-lap shear tests, conducted on specimens with fiber reinforced cementitious matrix (FRCM) composite strips bonded to concrete blocks, are presented in this paper. The FRCM composite was comprised of polyparaphenylene benzobisoxazole (PBO) fibers and polymer-modified cement-based mortar. This study indicates that in PBO FRCM–concrete joints debonding mainly occurs at the matrix–fiber interface. Friction between fiber filaments and between fibers and matrix is observed after the debonding process initiates. The experimental data suggest that a width effect does not exist among the fiber bundles, and an effective bond length can be defined and is approximately 260 mm. Axial strain profiles along the bonded length are analyzed to investigate the stress-transfer mechanism at the matrix–fiber interface.
2014
T. D’Antino, C. Carloni, L.H. Sneed, C. Pellegrino (2014). Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach. ENGINEERING FRACTURE MECHANICS, 117, 94-111 [10.1016/j.engfracmech.2014.01.011].
T. D’Antino;C. Carloni;L.H. Sneed;C. Pellegrino
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/477967
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 245
  • ???jsp.display-item.citation.isi??? 197
social impact