The THELMA (Thermal-Hydraulic-ELectro-MAgnetic) code has been developed with the aim of simulating the main aspects of superconductors to be used in the coils of the International Thermonuclear Experimental Reactor (ITER). An application of the code is presented here, where THELMA is used to simulate a single strand by considering, as cable elements, groups of superconducting (SC) filaments and the corresponding portion of the resistive matrix. This approach is used to reproduce the voltage-current characteristic of a Nb3Sn bronze route strand when subject to a bending mechanical load. Attention is focused particularly on the effect of the applied mechanical load on the critical current, which is considered a relevant item in the explanation of the degradation of the coil performance observed in several ITER Model and Insert Coil experiments. The longitudinal strain of the SC filaments is calculated by means of a composite beam model of the strand, taking into account the non-linear, temperature-dependent material characteristics of the components. The whole load history is simulated, computing first the thermal strain due to cool-down, and then the mechanical strain due to the bending at 4.2 K.
P.L. Ribani, D.P. Boso, M. Lefik, Y. Nunoya, L. savoldi Richard, B.A. Schrefler, et al. (2006). THELMA code analysis of bronze route Nb3Sn strand bending effect on Ic. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 16 (2), 860-863 [10.1109/TASC.2006.873337].
THELMA code analysis of bronze route Nb3Sn strand bending effect on Ic
RIBANI, PIER LUIGI;
2006
Abstract
The THELMA (Thermal-Hydraulic-ELectro-MAgnetic) code has been developed with the aim of simulating the main aspects of superconductors to be used in the coils of the International Thermonuclear Experimental Reactor (ITER). An application of the code is presented here, where THELMA is used to simulate a single strand by considering, as cable elements, groups of superconducting (SC) filaments and the corresponding portion of the resistive matrix. This approach is used to reproduce the voltage-current characteristic of a Nb3Sn bronze route strand when subject to a bending mechanical load. Attention is focused particularly on the effect of the applied mechanical load on the critical current, which is considered a relevant item in the explanation of the degradation of the coil performance observed in several ITER Model and Insert Coil experiments. The longitudinal strain of the SC filaments is calculated by means of a composite beam model of the strand, taking into account the non-linear, temperature-dependent material characteristics of the components. The whole load history is simulated, computing first the thermal strain due to cool-down, and then the mechanical strain due to the bending at 4.2 K.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
