ABSTRACT A complete experimental approach is here carried out to obtain the dynamic characterization of an automotive brake disc fixed on its grounded knuckle. The operative deflection shapes (ODS) were measured under harmonic excitation in the 1-23 kHz frequency range. Electronic Speckle Pattern Interferometry (ESPI) [1, 2] technology was exploited to measure high spatially defined full field displacement maps at each frequency by means of optical non-contact techniques. The harmonic excitation source was an electrodynamic shaker. The displacement maps acquired depict the dynamic be-havior of the brake disc with high accuracy in the whole range, from the global bending modes at low frequency to the arising of small lobes at high frequency, with particular attention paid to the transition over resonance frequencies. Results are re-ported and discussed in detail.

Dynamic behaviour characterization of a brake disc by means of electronic speckle pattern interferometry measurements / A. Zanarini. - ELETTRONICO. - (2005), pp. 1-8. (Intervento presentato al convegno ASME - IDETC/CIE 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference tenutosi a Long Beach, CA, USA nel 24-28 settembre 2005).

Dynamic behaviour characterization of a brake disc by means of electronic speckle pattern interferometry measurements

ZANARINI, ALESSANDRO
2005

Abstract

ABSTRACT A complete experimental approach is here carried out to obtain the dynamic characterization of an automotive brake disc fixed on its grounded knuckle. The operative deflection shapes (ODS) were measured under harmonic excitation in the 1-23 kHz frequency range. Electronic Speckle Pattern Interferometry (ESPI) [1, 2] technology was exploited to measure high spatially defined full field displacement maps at each frequency by means of optical non-contact techniques. The harmonic excitation source was an electrodynamic shaker. The displacement maps acquired depict the dynamic be-havior of the brake disc with high accuracy in the whole range, from the global bending modes at low frequency to the arising of small lobes at high frequency, with particular attention paid to the transition over resonance frequencies. Results are re-ported and discussed in detail.
2005
Proceeding of the ASME - IDETC/CIE 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
1
8
Dynamic behaviour characterization of a brake disc by means of electronic speckle pattern interferometry measurements / A. Zanarini. - ELETTRONICO. - (2005), pp. 1-8. (Intervento presentato al convegno ASME - IDETC/CIE 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference tenutosi a Long Beach, CA, USA nel 24-28 settembre 2005).
A. Zanarini
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/28471
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 14
  • ???jsp.display-item.citation.isi??? 8
social impact