An analytical procedure for the calculation of the inductance of planar zig-zag spiral inductors is proposed. The procedure is based on the partial inductance concept and models the inductor as a series of a number of parts. The self-inductance of each individual part, which has the shape of a parallelogram, and the mutual inductance between any two parts of the inductor are determined. The inductance of a planar zig-zag spiral inductor can thus be obtained for any width, length and angle of the saw-tooth configuration. The procedure is validated with experimental measurements; the agreement between estimated and measured inductances is very good.

Analytical calculation of the inductance of planar zig-zag spiral inductors

SANDROLINI, LEONARDO;REGGIANI, UGO;PUCCETTI, GIOVANNI
2013

Abstract

An analytical procedure for the calculation of the inductance of planar zig-zag spiral inductors is proposed. The procedure is based on the partial inductance concept and models the inductor as a series of a number of parts. The self-inductance of each individual part, which has the shape of a parallelogram, and the mutual inductance between any two parts of the inductor are determined. The inductance of a planar zig-zag spiral inductor can thus be obtained for any width, length and angle of the saw-tooth configuration. The procedure is validated with experimental measurements; the agreement between estimated and measured inductances is very good.
2013
L. Sandrolini;U. Reggiani;G. Puccetti
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/189859
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 13
  • ???jsp.display-item.citation.isi??? 9
social impact