In this paper preliminary results are summarized on the use of a combined Additive Layer Manufacturing (ALM) and indirect replication methodology to reconstruct reticular-like, three-dimensional (3D) structures mimicking the 3D vascular network of the adult human thyroid gland. In a first step, we de- veloped a fractal-like algorithm capable of modeling the native arterial distribution of the adult thyroid lobe, allowing for vascular growth within its geometrical domain. Although some arbitrary simplifications were adopted, yet the vascular density of the computational simulation showed good consistency with that of a na- tive thyroid lobe. In a second step, single vascular branches were prototyped based on the STL output of the algorithm and ALM techniques, up to the achievement of a model having satisfactory geometric- al/morphological accuracy. In a third step, the problem of reproducing the vascular geometry with a biocom- patible polymer was addressed, and different protocols of replication technology were evaluated. Limits and possible methodological solutions are discussed.

Bassoli E, Denti L, Gatto A, Paderno A, Spaletta G, Zini N, et al. (2012). New approaches to prototype 3D vascular-like structures by additive layer manufacturing. LONDON : CRC Press, Taylor & Francis Group, a Balkema Book [10.1201/b11341-8].

New approaches to prototype 3D vascular-like structures by additive layer manufacturing

PADERNO, ALESSANDRO;SPALETTA, GIULIA;STRUSI, VALENTINA;TONI, ROBERTO
2012

Abstract

In this paper preliminary results are summarized on the use of a combined Additive Layer Manufacturing (ALM) and indirect replication methodology to reconstruct reticular-like, three-dimensional (3D) structures mimicking the 3D vascular network of the adult human thyroid gland. In a first step, we de- veloped a fractal-like algorithm capable of modeling the native arterial distribution of the adult thyroid lobe, allowing for vascular growth within its geometrical domain. Although some arbitrary simplifications were adopted, yet the vascular density of the computational simulation showed good consistency with that of a na- tive thyroid lobe. In a second step, single vascular branches were prototyped based on the STL output of the algorithm and ALM techniques, up to the achievement of a model having satisfactory geometric- al/morphological accuracy. In a third step, the problem of reproducing the vascular geometry with a biocom- patible polymer was addressed, and different protocols of replication technology were evaluated. Limits and possible methodological solutions are discussed.
2012
Innovative Developments in Virtual and Physical Prototyping
35
41
Bassoli E, Denti L, Gatto A, Paderno A, Spaletta G, Zini N, et al. (2012). New approaches to prototype 3D vascular-like structures by additive layer manufacturing. LONDON : CRC Press, Taylor & Francis Group, a Balkema Book [10.1201/b11341-8].
Bassoli E; Denti L; Gatto A; Paderno A; Spaletta G; Zini N; Strusi V; Dallatana D; Toni R
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/109391
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 9
  • ???jsp.display-item.citation.isi??? 2
social impact