This paper refers to the results obtained in the investiga-tion on bubbles formation in hybrid Laser-GMAWwelding. Bead on plate weldings were obtained on 8 mm thick AA6082 plates and the process parameters investigated were: GMAW current, arc transfer mode and mutual distance between arc and laser sources. Bubbles were observed by means of X-ray inspection techniques and measured exploiting an image analysis software. Finally a correlation, based on analysis of variance, between process parameters and porosity formation is proposed.
Investigation on porosity formation in aa6082 hybrid laser-gmaw welding / A. Ascari; A. Fortunato; L. Orazi; G. Campana; G. Tani. - ELETTRONICO. - (2010), pp. 229-236. (Intervento presentato al convegno ASME 2010 International Manufacturing Science and Engineering Conference (MSEC2010) tenutosi a Byfront Convention Center, Erie, PA nel October 12-15, 2010) [10.1115/MSEC2010-34247].
Investigation on porosity formation in aa6082 hybrid laser-gmaw welding
ASCARI, ALESSANDRO;FORTUNATO, ALESSANDRO;ORAZI, LEONARDO;CAMPANA, GIAMPAOLO;TANI, GIOVANNI
2010
Abstract
This paper refers to the results obtained in the investiga-tion on bubbles formation in hybrid Laser-GMAWwelding. Bead on plate weldings were obtained on 8 mm thick AA6082 plates and the process parameters investigated were: GMAW current, arc transfer mode and mutual distance between arc and laser sources. Bubbles were observed by means of X-ray inspection techniques and measured exploiting an image analysis software. Finally a correlation, based on analysis of variance, between process parameters and porosity formation is proposed.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.