Electrical energy management is fundamental to optimize the generation and usage of power within a Smart Grid; and the measurement of parameters of electrical systems is crucial for achieving efficient control on electric loads. Most of the existing smart metering devices use voltage probes which are invasive, because they need a direct connection to the electric conductor. We present an innovative three-phase clamp-on power meter that can be installed without breaking the circuit under measurement and without temporary interruption of the supply. It is used tight around the cable insulators and it measures both current and voltage of the underneath wire. Moreover, it enables the use of advanced signal processing algorithms such as Non-Intrusive Load Monitoring (NILM), which provides fine grain load detection even if a single point of measurement is used.

Villani, C., Benatti, S., Brunelli, D., Benini, L. (2018). A Contactless, Energy-Neutral Power Meter for Smart City Applications. Cham, Switzerland : Springer International Publishing [10.1007/978-3-319-55071-8_23].

A Contactless, Energy-Neutral Power Meter for Smart City Applications

Brunelli, Davide
Supervision
;
Benini, Luca
2018

Abstract

Electrical energy management is fundamental to optimize the generation and usage of power within a Smart Grid; and the measurement of parameters of electrical systems is crucial for achieving efficient control on electric loads. Most of the existing smart metering devices use voltage probes which are invasive, because they need a direct connection to the electric conductor. We present an innovative three-phase clamp-on power meter that can be installed without breaking the circuit under measurement and without temporary interruption of the supply. It is used tight around the cable insulators and it measures both current and voltage of the underneath wire. Moreover, it enables the use of advanced signal processing algorithms such as Non-Intrusive Load Monitoring (NILM), which provides fine grain load detection even if a single point of measurement is used.
2018
Applications in Electronics Pervading Industry, Environment and Society: APPLEPIES 2016
177
182
Villani, C., Benatti, S., Brunelli, D., Benini, L. (2018). A Contactless, Energy-Neutral Power Meter for Smart City Applications. Cham, Switzerland : Springer International Publishing [10.1007/978-3-319-55071-8_23].
Villani, Clemente; Benatti, Simone; Brunelli, Davide; Benini, Luca
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/1042573
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 0
  • OpenAlex ND
social impact