ROBUSTO, FRANCESCO
ROBUSTO, FRANCESCO
DIPARTIMENTO DI INGEGNERIA INDUSTRIALE
Fatigue response of additively manufactured as-built 15-5 PH stainless steel and effects of machining and thermal and surface treatments
2023 Croccolo D.; Bogojevic N.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Soskic Z.; Ciric-Kostic S.
Fretting fatigue of interference fitted joints: development of a novel specimen for four-point rotating-bending tests and experimental results
2023 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Scapecchi C.
AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL: EFFECTS OF POST-MANUFACTURE TREATMENTS
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric-Kostic, N. Bogojevic
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
Effects of aging temperature and humidity on the response of medium and high strength threadlockers
2022 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
EXPERIMENTAL INVESTIGATION ON THE FATIGUE STRENGTH FOR DIFFERENT TIGHTENING PROCEDURES AND MATERIALS IN METRIC SCREWS
2022 Fini S.; Croccolo D.; De Agostinis M.; Olmi G.; Robusto F.; Scapecchi C.
Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing
2022 Ciric-Kostic S.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Soskic Z.; Bogojevic N.
FATIGUE STRENGTH OF AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL AND EFFECTS OF POST-MANUFACTURE TREATMENTS
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
Fretting Fatigue in Mechanical Joints: A Literature Review
2022 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Scapecchi C.
Temperature response of LOCTITE 648 anaerobic adhesive and hoop channels to enhance its effectiveness under high interference
2022 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Cylindrical cross section optimization
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.
Effects of aging temperature and humidity on the response of medium and high strength threadlockers
2021 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Experimental characterization of the ageing behaviour of anaerobic threadlockers
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Hoop channels to enhance the effectiveness of LOCTITE 648 anaerobic adhesive under high interference
2021 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Influence of heat and surface treatments on the fatigue response of DMLS manufactured AlSi10Mg
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Bonomo A.
Numerical and Experimental Modeling of the Thermal Flow in a Modern Rotary Transfer Machine
2021 Robusto F.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Rizzitelli M.; Vincenzi N.
Comportamento tribologico di collegamenti filettati per applicazioni industriali
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Paiardini, Luca
Effect of material and lubrication conditions on the underhead frictional response in high strength socket-head screws
2020 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Vincenzi N.
Experimental investigation on the friction coefficients for different materials, lubrication conditions and coatings in bolted joints
2020 Croccolo D.; Fini S.; Paiardini L.; Olmi G.; De Agostinis M.; Robusto F.; Gualdi G.
| Titolo | Autore(i) | Anno | Periodico | Editore | Tipo | File |
|---|---|---|---|---|---|---|
| Fatigue response of additively manufactured as-built 15-5 PH stainless steel and effects of machining and thermal and surface treatments | Croccolo D.; Bogojevic N.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Soskic Z.; Ciric-Kostic S. | 2023-01-01 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | - | 1.01 Articolo in rivista | Manuscript_FFEMS_PH_POST-PRINT_OA.pdf |
| Fretting fatigue of interference fitted joints: development of a novel specimen for four-point rotating-bending tests and experimental results | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Scapecchi C. | 2023-01-01 | ENGINEERING FAILURE ANALYSIS | - | 1.01 Articolo in rivista | Fretting-fatigue_rev1_EFA_3_POST-PRINT_OA.pdf |
| AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL: EFFECTS OF POST-MANUFACTURE TREATMENTS | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric-Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |
| Effects of aging temperature and humidity on the response of medium and high strength threadlockers | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2022-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | AB21_137_rev_POST-PRINT_OA.pdf |
| EXPERIMENTAL INVESTIGATION ON THE FATIGUE STRENGTH FOR DIFFERENT TIGHTENING PROCEDURES AND MATERIALS IN METRIC SCREWS | Fini S.; Croccolo D.; De Agostinis M.; Olmi G.; Robusto F.; Scapecchi C. | 2022-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing | Ciric-Kostic S.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Soskic... Z.; Bogojevic N. | 2022-01-01 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | - | 1.01 Articolo in rivista | Fatigue Fract Eng Mat Struct - 2021 - Fatigue response of additively manufactured Maraging Stainless Steel CX_lighter.pdf |
| FATIGUE STRENGTH OF AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL AND EFFECTS OF POST-MANUFACTURE TREATMENTS | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| Fretting Fatigue in Mechanical Joints: A Literature Review | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Scapecchi C. | 2022-01-01 | LUBRICANTS | - | 1.01 Articolo in rivista | lubricants-10-00053-v2.pdf |
| Temperature response of LOCTITE 648 anaerobic adhesive and hoop channels to enhance its effectiveness under high interference | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2022-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | - |
| Cylindrical cross section optimization | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F. | 2021-01-01 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE | - | 1.01 Articolo in rivista | - |
| Effects of aging temperature and humidity on the response of medium and high strength threadlockers | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2021-01-01 | - | Quântica Editora, Lda. | 4.02 Riassunto (Abstract) | - |
| Experimental characterization of the ageing behaviour of anaerobic threadlockers | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2021-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Hoop channels to enhance the effectiveness of LOCTITE 648 anaerobic adhesive under high interference | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2021-01-01 | - | Quântica Editora, Lda. | 4.02 Riassunto (Abstract) | - |
| Influence of heat and surface treatments on the fatigue response of DMLS manufactured AlSi10Mg | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Bonomo A. | 2021-01-01 | - | Trans Tech Publications Ltd | 4.01 Contributo in Atti di convegno | - |
| Numerical and Experimental Modeling of the Thermal Flow in a Modern Rotary Transfer Machine | Robusto F.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Rizzitelli M.; Vincenzi N. | 2021-01-01 | JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS | - | 1.01 Articolo in rivista | - |
| Comportamento tribologico di collegamenti filettati per applicazioni industriali | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Pa...iardini, Luca | 2020-01-01 | RIVISTA ITALIANA DELLA SALDATURA | - | 1.01 Articolo in rivista | - |
| Effect of material and lubrication conditions on the underhead frictional response in high strength socket-head screws | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Vincenzi N. | 2020-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Experimental investigation on the friction coefficients for different materials, lubrication conditions and coatings in bolted joints | Croccolo D.; Fini S.; Paiardini L.; Olmi G.; De Agostinis M.; Robusto F.; Gualdi G. | 2020-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |