PAIARDINI, LUCA
PAIARDINI, LUCA
DEI - DIPARTIMENTO DI INGEGNERIA DELL'ENERGIA ELETTRICA E DELL'INFORMAZIONE "GUGLIELMO MARCONI"
Dottorandi
Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments
2024 Fini, S.; Croccolo, D.; De Agostinis, M.; Olmi, G.; Paiardini, L.; Scapecchi, C.; Mele, M.
FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS
2023 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardini, Luca; Scapecchi, Chiara
AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL: EFFECTS OF POST-MANUFACTURE TREATMENTS
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric-Kostic, N. Bogojevic
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
Effects of aging temperature and humidity on the response of medium and high strength threadlockers
2022 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing
2022 Ciric-Kostic S.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Soskic Z.; Bogojevic N.
FATIGUE STRENGTH OF AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL AND EFFECTS OF POST-MANUFACTURE TREATMENTS
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
Temperature response of LOCTITE 648 anaerobic adhesive and hoop channels to enhance its effectiveness under high interference
2022 Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F.
Effects of aging temperature and humidity on the response of medium and high strength threadlockers
2021 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Experimental characterization of the ageing behaviour of anaerobic threadlockers
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Hoop channels to enhance the effectiveness of LOCTITE 648 anaerobic adhesive under high interference
2021 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Influence of heat and surface treatments on the fatigue response of DMLS manufactured AlSi10Mg
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Bonomo A.
Comportamento tribologico di collegamenti filettati per applicazioni industriali
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Paiardini, Luca
Experimental investigation on the friction coefficients for different materials, lubrication conditions and coatings in bolted joints
2020 Croccolo D.; Fini S.; Paiardini L.; Olmi G.; De Agostinis M.; Robusto F.; Gualdi G.
Influence of the interference level and of the assembly process on the shear strength of Loctite 648 anaerobic adhesive
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Tribological properties of connecting rod high strength screws improved by surface peening treatments
2020 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Connecting rod screw tribological response optimized by a proper choice of peening treatment parameters
2019 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Deep rolling and shot-peening to improve the tribological response of connecting rod screws
2019 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
| Titolo | Autore(i) | Anno | Periodico | Editore | Tipo | File |
|---|---|---|---|---|---|---|
| Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments | Fini, S.; Croccolo, D.; De Agostinis, M.; Olmi, G.; Paiardini, L.; Scapecchi, C.; Mele, M. | 2024-01-01 | PROGRESS IN ADDITIVE MANUFACTURING | - | 1.01 Articolo in rivista | s40964-024-00712-y.pdf |
| FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardin...i, Luca; Scapecchi, Chiara | 2023-01-01 | - | INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial | 4.01 Contributo in Atti di convegno | PDF-Book_20072.pdf |
| AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL: EFFECTS OF POST-MANUFACTURE TREATMENTS | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric-Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |
| Effects of aging temperature and humidity on the response of medium and high strength threadlockers | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2022-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | AB21_137_rev_POST-PRINT_OA.pdf |
| Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing | Ciric-Kostic S.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Soskic... Z.; Bogojevic N. | 2022-01-01 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | - | 1.01 Articolo in rivista | Fatigue Fract Eng Mat Struct - 2021 - Fatigue response of additively manufactured Maraging Stainless Steel CX_lighter.pdf |
| FATIGUE STRENGTH OF AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL AND EFFECTS OF POST-MANUFACTURE TREATMENTS | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| Temperature response of LOCTITE 648 anaerobic adhesive and hoop channels to enhance its effectiveness under high interference | Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F. | 2022-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | Croccolo_De-Agostinis_Fini_Olmi_Paiardini_Robusto_POST-PRINT.pdf |
| Effects of aging temperature and humidity on the response of medium and high strength threadlockers | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2021-01-01 | - | Quântica Editora, Lda. | 4.02 Riassunto (Abstract) | - |
| Experimental characterization of the ageing behaviour of anaerobic threadlockers | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2021-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Hoop channels to enhance the effectiveness of LOCTITE 648 anaerobic adhesive under high interference | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2021-01-01 | - | Quântica Editora, Lda. | 4.02 Riassunto (Abstract) | - |
| Influence of heat and surface treatments on the fatigue response of DMLS manufactured AlSi10Mg | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Bonomo A. | 2021-01-01 | - | Trans Tech Publications Ltd | 4.01 Contributo in Atti di convegno | - |
| Comportamento tribologico di collegamenti filettati per applicazioni industriali | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Pa...iardini, Luca | 2020-01-01 | RIVISTA ITALIANA DELLA SALDATURA | - | 1.01 Articolo in rivista | - |
| Experimental investigation on the friction coefficients for different materials, lubrication conditions and coatings in bolted joints | Croccolo D.; Fini S.; Paiardini L.; Olmi G.; De Agostinis M.; Robusto F.; Gualdi G. | 2020-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Influence of the interference level and of the assembly process on the shear strength of Loctite 648 anaerobic adhesive | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2020-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | - |
| Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2020-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | Croccolo_De-Agostinis_Fini_Olmi_Paiardini_Robusto_JA_POST-PRINT_OA.pdf |
| Tribological properties of connecting rod high strength screws improved by surface peening treatments | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2020-01-01 | METALS | - | 1.01 Articolo in rivista | metals-10-00344.pdf |
| Connecting rod screw tribological response optimized by a proper choice of peening treatment parameters | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2019-01-01 | - | Società Editrice Esculapio s.r.l. | 4.01 Contributo in Atti di convegno | - |
| Deep rolling and shot-peening to improve the tribological response of connecting rod screws | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2019-01-01 | - | Società Editrice Esculapio s.r.l. | 4.01 Contributo in Atti di convegno | - |