CESCHINI, LORELLA
CESCHINI, LORELLA
DIPARTIMENTO DI INGEGNERIA INDUSTRIALE
Docenti di ruolo di Ia fascia
A Novel Approach for Evaluating the Influence of Texture Intensities on the First Magnetization Curve and Hysteresis Loss in Fe–Si Alloys
2024 Daniele Carosi , Alessandro Morri , Lorella Ceschini, Alessandro Ferraiuolo
Direct artificial aging of the PBF-LB AlSi10Mg alloy designed to enhance the trade-off between strength and residual stress relief
2024 Di Egidio, Gianluca; Tonelli, Lavinia; Zanni, Mattia; Carosi, Daniele; Morri, Alessandro; Ceschini, Lorella
Linearising anhysteretic magnetisation curves: A novel algorithm for finding simulation parameters and magnetic moments
2024 Carosi, Daniele; Zama, Fabiana; Morri, Alessandro; Ceschini, Lorella
A novel heat treatment of the additively manufactured Co28Cr6Mo biomedical alloy and its effects on hardness, microstructure and sliding wear behavior
2023 Tonelli L.; Ahmed M.M.Z.; Ceschini L.
Aging Behaviour of a 12.2Cr-10Ni-1Mo-1Ti-0.6Al Precipitation-Hardening Stainless Steel Manufactured via Laser Powder Bed Fusion
2023 Morri Alessandro; Zanni Mattia; Ceschini Lorella; Fortunato Alessandro; Pellizzari Massimo
Anodizing by Electrochemical Oxidation (ECO) of the Laser Powder Bed Fusion-processed A357 aluminium alloy: microstructural characterization and dry sliding behaviour
2023 Lorenzetti, Luca; Tonelli, Lavinia; Boromei, Iuri; Ceschini, Lorella; Shashkov, Pavel; Martini, Carla
Dry sliding behavior of AlSi10Mg alloy produced by Laser-based Powder Bed Fusion: influence of heat treatment and microstructure
2023 Di Egidio G.; Martini C.; Borjesson J.; Ghassemali E.; Ceschini L.; Morri A.
Effect of heat treatment and defects on the tensile behavior of a hot work tool steel manufactured by laser powder bed fusion
2023 Zanni, M; Berto, F; Vullum, PE; Tonelli, L; Morri, A; Ceschini, L
High‐Temperature Behavior of the Heat‐Treated and Overaged AlSi10Mg Alloy Produced by Laser‐Based Powder Bed Fusion and Comparison with Conventional Al–Si–Mg‐Casting Alloys
2023 Di Egidio, Gianluca; Morri, Alessandro; Ceschini, Lorella; Tonelli, Lavinia
Influence of Electroless Nickel—DLC (Diamond-like Carbon) Multilayer Coating on the Mechanical Performance of the Heat-Treated AlSi10Mg Alloy Produced by Powder Bed Fusion-Laser Beam
2023 Di Egidio, Gianluca; Martini, Carla; Ceschini, Lorella; Morri, Alessandro
Influence of Microstructure on Fracture Mechanisms of the Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion
2023 Di Egidio, Gianluca; Martini, Carla; Börjesson, Johan; Ghassemali, Ehsan; Ceschini, Lorella; Morri, Alessandro
Influence of Ni-P + DLC multilayer coatings on the tensile properties of the AlSi10Mg alloy produced by Laser-based Powder Bed Fusion
2023 Di Egidio, G.; Ceschini, L.; Martini, C.; Morri, A.
Mechanical and microstructural features of wire-and-arc additively manufactured carbon steel thick plates
2023 Laghi V.; Arrè L.; Tonelli L.; Di Egidio G.; Ceschini L.; Monzón I.; Laguía A.; Dieste J.A.; Palermo M.
On the Role of Microstructure and Defects in the Room and High-Temperature Tensile Behavior of the PBF-LB A357 (AlSi7Mg) Alloy in As-Built and Peak-Aged Conditions
2023 Tonelli L.; Liverani E.; Di Egidio G.; Fortunato A.; Morri A.; Ceschini L.
Room- and High-Temperature Fatigue Strength of the T5 and Rapid T6 Heat-Treated AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion
2023 Di Egidio, Gianluca; Ceschini, Lorella; Morri, Alessandro; Zanni, Mattia
Tensile behaviour of a hot work tool steel manufactured via Laser Powder Bed Fusion: effect of an innovative high pressure heat treatment
2023 Zanni, Mattia; Morri, Alessandro; Messieri, Simone; Ceschini, Lorella
A Novel T6 Rapid Heat Treatment for AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion: Comparison with T5 and Conventional T6 Heat Treatments
2022 Di Egidio, Gianluca; Ceschini, Lorella; Morri, Alessandro; Martini, Carla; Merlin, Mattia
A357 aluminium alloy produced by LPBF: Tribological behaviour in dry sliding conditions
2022 Lorenzetti, L; Tonelli, L; Ceschini, L; Liverani, E; Martini, C
Development and validation of a probabilistic model for notch fatigue strength prediction of tool steels based on surface defects
2022 Zanni M.; Morri A.; Ceschini L.
Effect of Different Heat Treatments on Tensile Properties and Unnotched and Notched Fatigue Strength of Cold Work Tool Steel Produced by Powder Metallurgy
2022 Morri A.; Ceschini L.; Messieri S.