Sfoglia per Autore
DMLS Built Maraging Steel Fatigue Response Investigated for Different Build Orientations and Allowance for Machining
2019 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Muharemovic N.; Bogojevic N.; Vranic A.; Ciric-Kostic S.
Experimentally validated structural finite element method analysis of a tibial intramedullary nail: Optimal choice of the contact settings
2019 Croccolo, D.; De Agostinis, M.; Fini, S.; Funaioli, S.; Olmi, G.; Robusto, F.*
Finite element analysis of tapped thread joints: Setup of a computationally efficient modeling approach
2019 De Agostinis M.; Croccolo D.; Fini S.; Olmi G.; Robusto F.; Bagnoli L.
Effect of material and lubrication conditions on the underhead frictional response in high strength socket-head screws
2020 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Vincenzi N.
Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Comportamento tribologico di collegamenti filettati per applicazioni industriali
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Paiardini, Luca
Experimental investigation on the friction coefficients for different materials, lubrication conditions and coatings in bolted joints
2020 Croccolo D.; Fini S.; Paiardini L.; Olmi G.; De Agostinis M.; Robusto F.; Gualdi G.
Wear behavior of electrodeposited nickel coating on ZP5 zinc alloy
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Tonelli, Lavinia
Influence of the interference level and of the assembly process on the shear strength of Loctite 648 anaerobic adhesive
2020 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Tribological properties of connecting rod high strength screws improved by surface peening treatments
2020 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Influence of heat and surface treatments on the fatigue response of DMLS manufactured AlSi10Mg
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Bonomo A.
Effects of aging temperature and humidity on the response of medium and high strength threadlockers
2021 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Experimental characterization of the ageing behaviour of anaerobic threadlockers
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
Hoop channels to enhance the effectiveness of LOCTITE 648 anaerobic adhesive under high interference
2021 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robusto, Francesco
Cylindrical cross section optimization
2021 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.
Numerical and Experimental Modeling of the Thermal Flow in a Modern Rotary Transfer Machine
2021 Robusto F.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Rizzitelli M.; Vincenzi N.
Effects of aging temperature and humidity on the response of medium and high strength threadlockers
2022 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing
2022 Ciric-Kostic S.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Soskic Z.; Bogojevic N.
EXPERIMENTAL INVESTIGATION ON THE FATIGUE STRENGTH FOR DIFFERENT TIGHTENING PROCEDURES AND MATERIALS IN METRIC SCREWS
2022 Fini S.; Croccolo D.; De Agostinis M.; Olmi G.; Robusto F.; Scapecchi C.
| Titolo | Autore(i) | Anno | Periodico | Editore | Tipo | File |
|---|---|---|---|---|---|---|
| DMLS Built Maraging Steel Fatigue Response Investigated for Different Build Orientations and Allowance for Machining | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Muharemovic N.; Bogojevic N.; Vranic ...A.; Ciric-Kostic S. | 2019-01-01 | - | Springer | 2.01 Capitolo / saggio in libro | - |
| Experimentally validated structural finite element method analysis of a tibial intramedullary nail: Optimal choice of the contact settings | Croccolo, D.; De Agostinis, M.; Fini, S.; Funaioli, S.; Olmi, G.; Robusto, F.* | 2019-01-01 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART H, JOURNAL OF ENGINEERING IN MEDICINE | - | 1.01 Articolo in rivista | - |
| Finite element analysis of tapped thread joints: Setup of a computationally efficient modeling approach | De Agostinis M.; Croccolo D.; Fini S.; Olmi G.; Robusto F.; Bagnoli L. | 2019-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Effect of material and lubrication conditions on the underhead frictional response in high strength socket-head screws | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Vincenzi N. | 2020-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2020-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | Croccolo_De-Agostinis_Fini_Olmi_Paiardini_Robusto_JA_POST-PRINT_OA.pdf |
| Comportamento tribologico di collegamenti filettati per applicazioni industriali | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; Pa...iardini, Luca | 2020-01-01 | RIVISTA ITALIANA DELLA SALDATURA | - | 1.01 Articolo in rivista | - |
| Experimental investigation on the friction coefficients for different materials, lubrication conditions and coatings in bolted joints | Croccolo D.; Fini S.; Paiardini L.; Olmi G.; De Agostinis M.; Robusto F.; Gualdi G. | 2020-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Wear behavior of electrodeposited nickel coating on ZP5 zinc alloy | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Robusto, Francesco; To...nelli, Lavinia | 2020-01-01 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART L, JOURNAL OF MATERIALS, DESIGN AND APPLICATIONS. | - | 1.01 Articolo in rivista | - |
| Influence of the interference level and of the assembly process on the shear strength of Loctite 648 anaerobic adhesive | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2020-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | - |
| Tribological properties of connecting rod high strength screws improved by surface peening treatments | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2020-01-01 | METALS | - | 1.01 Articolo in rivista | metals-10-00344.pdf |
| Influence of heat and surface treatments on the fatigue response of DMLS manufactured AlSi10Mg | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Bonomo A. | 2021-01-01 | - | Trans Tech Publications Ltd | 4.01 Contributo in Atti di convegno | - |
| Effects of aging temperature and humidity on the response of medium and high strength threadlockers | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2021-01-01 | - | Quântica Editora, Lda. | 4.02 Riassunto (Abstract) | - |
| Experimental characterization of the ageing behaviour of anaerobic threadlockers | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2021-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
| Hoop channels to enhance the effectiveness of LOCTITE 648 anaerobic adhesive under high interference | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Paiardini, Luca; Robus...to, Francesco | 2021-01-01 | - | Quântica Editora, Lda. | 4.02 Riassunto (Abstract) | - |
| Cylindrical cross section optimization | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Robusto F. | 2021-01-01 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE | - | 1.01 Articolo in rivista | - |
| Numerical and Experimental Modeling of the Thermal Flow in a Modern Rotary Transfer Machine | Robusto F.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Rizzitelli M.; Vincenzi N. | 2021-01-01 | JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS | - | 1.01 Articolo in rivista | - |
| Effects of aging temperature and humidity on the response of medium and high strength threadlockers | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F. | 2022-01-01 | JOURNAL OF ADHESION | - | 1.01 Articolo in rivista | AB21_137_rev_POST-PRINT_OA.pdf |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |
| Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing | Ciric-Kostic S.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Soskic... Z.; Bogojevic N. | 2022-01-01 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | - | 1.01 Articolo in rivista | Fatigue Fract Eng Mat Struct - 2021 - Fatigue response of additively manufactured Maraging Stainless Steel CX_lighter.pdf |
| EXPERIMENTAL INVESTIGATION ON THE FATIGUE STRENGTH FOR DIFFERENT TIGHTENING PROCEDURES AND MATERIALS IN METRIC SCREWS | Fini S.; Croccolo D.; De Agostinis M.; Olmi G.; Robusto F.; Scapecchi C. | 2022-01-01 | - | American Society of Mechanical Engineers (ASME) | 4.01 Contributo in Atti di convegno | - |
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile