Regardless of the methodology adopted by each laboratory, there is a consensus about the three main stages in the creep testing procedure: the pre-cracking stage, the creep stage and the post-creep stage. Despite this general procedure, four main methodologies were conducted in fibre-reinforced concrete (FRC) specimens in the round-robin test (RRT): flexure creep test on prismatic specimens based on EN 14651, direct tension creep test, flexure creep test on square panels based on EN 14488-5 and flexure creep test on round panels based on ASTM C1550. An overview of these four main methodologies is described in the following subsections. All the procedures defined by each participant were grouped by methodology and compared in terms of configuration, equipment and measurement devices.

Llano-Torre A., Serna P., Boshoff W.P., Buratti N., dos Santos K.F., Bernard E.S. (2021). General Procedure of Creep Test. Valencia : Springer Science and Business Media B.V. [10.1007/978-3-030-72736-9_4].

General Procedure of Creep Test

Boshoff W. P.;Buratti N.;
2021

Abstract

Regardless of the methodology adopted by each laboratory, there is a consensus about the three main stages in the creep testing procedure: the pre-cracking stage, the creep stage and the post-creep stage. Despite this general procedure, four main methodologies were conducted in fibre-reinforced concrete (FRC) specimens in the round-robin test (RRT): flexure creep test on prismatic specimens based on EN 14651, direct tension creep test, flexure creep test on square panels based on EN 14488-5 and flexure creep test on round panels based on ASTM C1550. An overview of these four main methodologies is described in the following subsections. All the procedures defined by each participant were grouped by methodology and compared in terms of configuration, equipment and measurement devices.
2021
RILEM State-of-the-Art Reports
31
46
Llano-Torre A., Serna P., Boshoff W.P., Buratti N., dos Santos K.F., Bernard E.S. (2021). General Procedure of Creep Test. Valencia : Springer Science and Business Media B.V. [10.1007/978-3-030-72736-9_4].
Llano-Torre A.; Serna P.; Boshoff W.P.; Buratti N.; dos Santos K.F.; Bernard E.S.
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/860854
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact