The steam reforming (SR) of natural gas plays a key role in the production of syngas (CO + H2) or H2, widely used to produce chemicals, fuels or energy. However, the depletion of fossil fuels and the increasing environmental constrains, have in the last decades prompted the attention towards renewable fuels. The main candidate to replace the natural gas (NG) is the biogas obtained by anaerobic fermentation of organic wastes or not edible biomass that, after removal of most pollutant compounds, is a mixture of CH4 and CO2 (clean biogas or CB) in variable amounts (35-50 vol.%) [1]. Currently CB is used to produce energy in cogeneration plants or biomethane (by CO2 SWAP) to be introduced in the NG distribution grid. The Dry Reforming (DR) may potentially convert both CH4 and CO2, although the many drawbacks (high reaction temperature and catalyst deactivation) limit its commercialization. Steam Reforming (SR) is an attractive option, although the CO2 fraction is barely converted in presence of high steam contents, decreasing the overall productivity. A promising upgrading is represented by the combined S/DR process, in which by controlling the amount of steam fed it is possible to limit catalyst deactivation and obtain syngas directly suitable for downstream applications as hydrocarbon or methanol synthesis. The syngas may be further upgraded through the Water Gas Shift (WGS) reaction, that allows to tune the H2/CO ratio or to improve the H2 production, developing an integrated processcatalysts, prepared by controlled calcination of hydrotalcite-type (HT) precursors, to be investigated in S/DR of CB or WGS of the obtained syngas [2,3]. The catalysts were deeply characterized before and after the tests to collect useful information to improve the performances by tuning catalyst composition and properties. A Ni-Mg-Al (Ni 10 wt.%) was used as benchmark evidencing a low activity together with a fast deactivation due to carbon formation and/or Ni0 reoxidation. The addition of very small amounts of Rh gave rise to a significant increase of activity and stability with time-on-stream, regardless of the reaction conditions adopted. The H2/CO molar ratio of the outlet stream was between 1.2-2.7 as a function of the temperature and amount of steam fed. Adding a further WGS step at high (HTS) or, better, medium (MTS) temperature it was possible to increase the H2-content in the outlet stream, lowering the CO content in the outlet stream to < 1.2 vol.%. The data collected support the conceptual idea of a process, integrating S/DR and WGS steps. Aim of this work was to proof this idea by developing new Ni-based catalysts and Cu-based, with a configuration leading to advantages in the energy balance of the process and decreasing the capital and operational expenditures (CAPEX and OPEX). 1. E. Lindkvist and M. Karlsson, J. Cleaner Prod. 174, 1588-1597 (2018). 2. G. Brenna, A. Vaccari, F. Basile, G. Fornasari, R. Faure and D. Gary, EP 2,599,541 (2013) to Air Liquide. 3. R. Faure, D. Gary, G. Fornasari, A. Vaccari, C. Lucarelli, N. Schiaroli, EP 3,254,760 A1 (2016) to Air Liquide and ALMA MATER STUDIORUM – Università di Bologna..

A. Vaccari, P.B. (2019). Hydrogen from clean biogas: A proof of concept of integrated process.

Hydrogen from clean biogas: A proof of concept of integrated process

A. Vaccari
;
P. Benito;G. Fornasari;G. Sanghez De Luna;N. Schiaroli
2019

Abstract

The steam reforming (SR) of natural gas plays a key role in the production of syngas (CO + H2) or H2, widely used to produce chemicals, fuels or energy. However, the depletion of fossil fuels and the increasing environmental constrains, have in the last decades prompted the attention towards renewable fuels. The main candidate to replace the natural gas (NG) is the biogas obtained by anaerobic fermentation of organic wastes or not edible biomass that, after removal of most pollutant compounds, is a mixture of CH4 and CO2 (clean biogas or CB) in variable amounts (35-50 vol.%) [1]. Currently CB is used to produce energy in cogeneration plants or biomethane (by CO2 SWAP) to be introduced in the NG distribution grid. The Dry Reforming (DR) may potentially convert both CH4 and CO2, although the many drawbacks (high reaction temperature and catalyst deactivation) limit its commercialization. Steam Reforming (SR) is an attractive option, although the CO2 fraction is barely converted in presence of high steam contents, decreasing the overall productivity. A promising upgrading is represented by the combined S/DR process, in which by controlling the amount of steam fed it is possible to limit catalyst deactivation and obtain syngas directly suitable for downstream applications as hydrocarbon or methanol synthesis. The syngas may be further upgraded through the Water Gas Shift (WGS) reaction, that allows to tune the H2/CO ratio or to improve the H2 production, developing an integrated processcatalysts, prepared by controlled calcination of hydrotalcite-type (HT) precursors, to be investigated in S/DR of CB or WGS of the obtained syngas [2,3]. The catalysts were deeply characterized before and after the tests to collect useful information to improve the performances by tuning catalyst composition and properties. A Ni-Mg-Al (Ni 10 wt.%) was used as benchmark evidencing a low activity together with a fast deactivation due to carbon formation and/or Ni0 reoxidation. The addition of very small amounts of Rh gave rise to a significant increase of activity and stability with time-on-stream, regardless of the reaction conditions adopted. The H2/CO molar ratio of the outlet stream was between 1.2-2.7 as a function of the temperature and amount of steam fed. Adding a further WGS step at high (HTS) or, better, medium (MTS) temperature it was possible to increase the H2-content in the outlet stream, lowering the CO content in the outlet stream to < 1.2 vol.%. The data collected support the conceptual idea of a process, integrating S/DR and WGS steps. Aim of this work was to proof this idea by developing new Ni-based catalysts and Cu-based, with a configuration leading to advantages in the energy balance of the process and decreasing the capital and operational expenditures (CAPEX and OPEX). 1. E. Lindkvist and M. Karlsson, J. Cleaner Prod. 174, 1588-1597 (2018). 2. G. Brenna, A. Vaccari, F. Basile, G. Fornasari, R. Faure and D. Gary, EP 2,599,541 (2013) to Air Liquide. 3. R. Faure, D. Gary, G. Fornasari, A. Vaccari, C. Lucarelli, N. Schiaroli, EP 3,254,760 A1 (2016) to Air Liquide and ALMA MATER STUDIORUM – Università di Bologna..
2019
CAT 2019
28
28
A. Vaccari, P.B. (2019). Hydrogen from clean biogas: A proof of concept of integrated process.
A. Vaccari, P. Benito, G. Fornasari, C, Lucarelli, G. Sanghez De Luna, N. Schiaroli
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/701701
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact