This paper presents the summary of the results of the comparison between the calculated and measured photons and electrons decay heat and activations of material samples irradiated at the Fusion Neutron Generator of the ENEA research centre of Frascati that were used for activation code validation purpose. Samples material considered are: Mo, Cu, Hf, Mg, Ni, Cd, Sn, Re, Ti, W, Ag, and Al. Material decay heat (and activity) at various times after the end of the samples irradiation have been evaluated using the ANITA-2000 activation code, by considering three different neutron activation libraries (EAF-99, FENDL/A-2 and EAF-2003), and the results have been compared with the experimental ones. The ratios between calculated and experimental values have been obtained and they are discussed in this paper.

Experimental fusion material photon and electron decay heat measurements: its use for activation codes validation / G. Cambi; D.G. Cepraga; M. Frisoni. - STAMPA. - 1:(2004), pp. 453-453. (Intervento presentato al convegno 23th Symposium on Fusion Technology SOFT tenutosi a Fondazione Cini, Venice, Italy nel 20-24 September 2004).

Experimental fusion material photon and electron decay heat measurements: its use for activation codes validation

CAMBI, GILIO;
2004

Abstract

This paper presents the summary of the results of the comparison between the calculated and measured photons and electrons decay heat and activations of material samples irradiated at the Fusion Neutron Generator of the ENEA research centre of Frascati that were used for activation code validation purpose. Samples material considered are: Mo, Cu, Hf, Mg, Ni, Cd, Sn, Re, Ti, W, Ag, and Al. Material decay heat (and activity) at various times after the end of the samples irradiation have been evaluated using the ANITA-2000 activation code, by considering three different neutron activation libraries (EAF-99, FENDL/A-2 and EAF-2003), and the results have been compared with the experimental ones. The ratios between calculated and experimental values have been obtained and they are discussed in this paper.
2004
23th Symposium on Fusion Technology SOFT, 20-24 September 2004, Fondazione Cini, Venice, Italy, Book of Abstracts
453
453
Experimental fusion material photon and electron decay heat measurements: its use for activation codes validation / G. Cambi; D.G. Cepraga; M. Frisoni. - STAMPA. - 1:(2004), pp. 453-453. (Intervento presentato al convegno 23th Symposium on Fusion Technology SOFT tenutosi a Fondazione Cini, Venice, Italy nel 20-24 September 2004).
G. Cambi; D.G. Cepraga; M. Frisoni
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/6098
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact