CROCCOLO, DARIO
CROCCOLO, DARIO
DIN - DIPARTIMENTO DI INGEGNERIA INDUSTRIALE
Docenti di ruolo di Ia fascia
Dario Croccolo; D. CROCCOLO; Croccolo; Croccolo D.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In corso di stampa Croccolo
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
In corso di stampa croccolo
A novel versatile axisymmetric specimen for mixed-mode I/II characterization of adhesively bonded joints
2025 Andoni, Dorin; Brugo, Tommaso Maria; Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Zucchelli, Andrea; Mele, Mattia
An Experimental Study on the Fatigue Response of Hybrid Additively Manufactured 1.2343 Hot Work Steel - MARAGING Steel MS1
2025 Croccolo, D.; Ciric-Kostic, S.; De Agostinis, M.; Fini, S.; Mele, M.; Bogojevic, N.; Sindelic, V.; Olmi, G.
Analysis and resolution of irregular breaks in tensile testing specimens fabricated via material extrusion
2025 Brugo, Tommaso Maria; Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Zucchelli, Andrea; Mele, Mattia
Effect of Build Orientation on the Fatigue Limit of CX Steel by Laser Powder Bed Fusion
2025 Mele, Mattia; Croccolo, Dario; Agostinis, Massimiliano De; Fini, Stefano; Šoškić, Zlatan; Bogojevic, Nebojsa; Ciric‐kostic, Snezana; Olmi, Giorgio
Homogenization and artificial neural network prediction of elastic properties in triply periodic minimal surface structures
2025 Mele, Mattia; Milan, Gianmarco; Paffetti, Andrea; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Croccolo, Dario
A STUDY ON THE DEGRADATION OF PRE-APPLIED THREADLOCKERS UNDER EXTENDED EXPOSURE TO SEVERE HYGRO-THERMAL CONDITIONS
2024 Fini, S.; Croccolo, D.; de Agostinis, M.; Mele, M.; Olmi, G.; Scapecchi, C.; Tariq, M. H. B.
ANALYSIS OF THE TRIBOLOGICAL BEHAVIOUR OF TITANIUM FASTENERS UNDER DIFFERENT TIGHTENING STRATEGIES
2024 De Agostinis, M.; Croccolo, D.; Fini, S.; Mele, M.; Olmi, G.; Scapecchi, C.; Martini, J.
Design of Special Equipment for the Mechanical Testing of Runway Light Fixtures
2024 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara
Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments
2024 Fini, S.; Croccolo, D.; De Agostinis, M.; Olmi, G.; Paiardini, L.; Scapecchi, C.; Mele, M.
High cycle fatigue response of grain refined EUROFER97
2024 Croccolo D.; Di Schino A.; Montanari R.; Olmi G.; Stornelli G.; Testani C.; Varone A.
Impact of bolt positioning on the stiffness of angular support brackets
2024 Croccolo, Dario; Fini, Stefano; Khan, Muhammad Yasir
Replacing non-renewable lubricants with vegetables oils in threaded joints
2024 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Nassar S.; Olmi G.; Scapecchi C.; Khan M.Y.; Tariq M.H.B.
AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE
2023 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan
Design and Optimization of a Pneumatic Clamping System for Direct-Driven Rotary Tables
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Canella G.; Gaspa C.; Vincenzi N.
Effect of different underhead shot-peening and lubrication conditions on high-strength screws undergoing multiple tightenings
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.
Effect of the Position in the Build Chamber on the Fatigue Strength of Additively Manufactured Maraging Steel MS1
2023 Croccolo D.; Ciric-Kostic S.; De Agostinis M.; Fini S.; Olmi G.; Bogojevic N.; Soskic Z.
Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Campana G.
Failure of Threaded Connections: A Literature Review
2023 Croccolo, D.; De Agostinis, M.; Fini, S.; Mele, M.; Olmi, G.; Scapecchi, C.; Tariq, M. H. B.