DE AGOSTINIS, MASSIMILIANO
DE AGOSTINIS, MASSIMILIANO
DIPARTIMENTO DI INGEGNERIA INDUSTRIALE
Docenti di ruolo di IIa fascia
DE AGOSTINIS M.; M. De Agostinis; Massimiliano De Agostinis; De agostinis
Design of Special Equipment for the Mechanical Testing of Runway Light Fixtures
2024 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara
Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments
2024 Fini S.; Croccolo D.; De Agostinis M.; Olmi G.; Paiardini L.; Scapecchi C.; Mele M.
Replacing non-renewable lubricants with vegetables oils in threaded joints
2024 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Nassar S.; Olmi G.; Scapecchi C.; Khan M.Y.; Tariq M.H.B.
AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE
2023 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan
Design and Optimization of a Pneumatic Clamping System for Direct-Driven Rotary Tables
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Canella G.; Gaspa C.; Vincenzi N.
Effect of different underhead shot-peening and lubrication conditions on high-strength screws undergoing multiple tightenings
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.
Effect of the Position in the Build Chamber on the Fatigue Strength of Additively Manufactured Maraging Steel MS1
2023 Croccolo D.; Ciric-Kostic S.; De Agostinis M.; Fini S.; Olmi G.; Bogojevic N.; Soskic Z.
Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Campana G.
Failure of Threaded Connections: A Literature Review
2023 Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Scapecchi C.; Tariq M.H.B.
Fatigue response of additively manufactured as-built 15-5 PH stainless steel and effects of machining and thermal and surface treatments
2023 Croccolo D.; Bogojevic N.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Soskic Z.; Ciric-Kostic S.
FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS
2023 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardini, Luca; Scapecchi, Chiara
Fretting fatigue of interference fitted joints: development of a novel specimen for four-point rotating-bending tests and experimental results
2023 Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Scapecchi C.
On the impact strength of adhesive bonded pin-and-collar joints
2023 Brugo T.M.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Zucchelli A.
Optimization of Bolted Joints: A Literature Review
2023 Croccolo, D; De Agostinis, M; Fini, S; Khan, MY; Mele, M; Olmi, G
STEAM-GENERATOR GRADE P91 STEEL COMPONENT WELD CREEP-ASSESSMENT
2023 Grisolia O.; Conte A.L.; Scano L.; Piccini F.; De Agostinis M.; Fini S.
Tribological Behaviour in the Underhead for High Strength Socket-Head Screws Coupled With Cast Iron and Tightened in Dry and Lubricated Condition
2023 Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Scapecchi, Chiara; Vincenzi, Nicolò
VIBRATION LOOSENING PERFORMANCE OF ADDITIVELY-MANUFACTURED BOLTED JOINTS
2023 Gerini-Romagnoli M.; De Agostinis M.; Nassar S.A.; Tedlapu K.
AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL: EFFECTS OF POST-MANUFACTURE TREATMENTS
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric-Kostic, N. Bogojevic
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL
2022 D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic
| Titolo | Autore(i) | Anno | Periodico | Editore | Tipo | File |
|---|---|---|---|---|---|---|
| Design of Special Equipment for the Mechanical Testing of Runway Light Fixtures | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecch...i, Chiara | 2024-01-01 | MACHINES | - | 1.01 Articolo in rivista | Design-of-Special-Equipment-for-the-Mechanical-Testing-of-Runway-Light-FixturesMachines.pdf |
| Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments | Fini S.; Croccolo D.; De Agostinis M.; Olmi G.; Paiardini L.; Scapecchi C.; Mele M. | 2024-01-01 | PROGRESS IN ADDITIVE MANUFACTURING | - | 1.01 Articolo in rivista | s40964-024-00712-y.pdf |
| Replacing non-renewable lubricants with vegetables oils in threaded joints | Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Nassar S.; Olmi G.; Scapecchi C.; Khan M.Y.; Tari...q M.H.B. | 2024-01-01 | JOURNAL OF ADVANCED JOINING PROCESSES | - | 1.01 Articolo in rivista | 1-s2.0-S2666330924000505-main_published_compressed.pdf |
| AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecch...i, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan | 2023-01-01 | - | INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial | 4.01 Contributo in Atti di convegno | - |
| Design and Optimization of a Pneumatic Clamping System for Direct-Driven Rotary Tables | Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Canella G.; Gaspa C.; Vincenzi N. | 2023-01-01 | MACHINES | - | 1.01 Articolo in rivista | machines-11-00207.pdf |
| Effect of different underhead shot-peening and lubrication conditions on high-strength screws undergoing multiple tightenings | Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G. | 2023-01-01 | TRIBOLOGY INTERNATIONAL | - | 1.01 Articolo in rivista | 2023 - Effect of different underhead shot-peening and lubrication conditions on high-strength screws undergoing multiple tightenings -.pdf |
| Effect of the Position in the Build Chamber on the Fatigue Strength of Additively Manufactured Maraging Steel MS1 | Croccolo D.; Ciric-Kostic S.; De Agostinis M.; Fini S.; Olmi G.; Bogojevic N.; Soskic Z. | 2023-01-01 | MACHINES | - | 1.01 Articolo in rivista | machines-11-00196.pdf |
| Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid | Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Campana G. | 2023-01-01 | PROGRESS IN ADDITIVE MANUFACTURING | - | 1.01 Articolo in rivista | 2023 - Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid - Croccolo et al.pdf |
| Failure of Threaded Connections: A Literature Review | Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Scapecchi C.; Tariq M.H.B. | 2023-01-01 | MACHINES | - | 1.01 Articolo in rivista | - |
| Fatigue response of additively manufactured as-built 15-5 PH stainless steel and effects of machining and thermal and surface treatments | Croccolo D.; Bogojevic N.; De Agostinis M.; Fini S.; Olmi G.; Robusto F.; Soskic Z.; Ciric-Kostic S. | 2023-01-01 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | - | 1.01 Articolo in rivista | Manuscript_FFEMS_PH_POST-PRINT_OA.pdf |
| FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardin...i, Luca; Scapecchi, Chiara | 2023-01-01 | - | INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial | 4.01 Contributo in Atti di convegno | PDF-Book_20072.pdf |
| Fretting fatigue of interference fitted joints: development of a novel specimen for four-point rotating-bending tests and experimental results | Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Paiardini L.; Robusto F.; Scapecchi C. | 2023-01-01 | ENGINEERING FAILURE ANALYSIS | - | 1.01 Articolo in rivista | Fretting-fatigue_rev1_EFA_3_POST-PRINT_OA.pdf |
| On the impact strength of adhesive bonded pin-and-collar joints | Brugo T.M.; Croccolo D.; De Agostinis M.; Fini S.; Olmi G.; Zucchelli A. | 2023-01-01 | INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | - | 1.01 Articolo in rivista | 1-s2.0-S0143749623000131-main.pdf |
| Optimization of Bolted Joints: A Literature Review | Croccolo, D; De Agostinis, M; Fini, S; Khan, MY; Mele, M; Olmi, G | 2023-01-01 | METALS | - | 1.01 Articolo in rivista | metals-13-01708-v2.pdf |
| STEAM-GENERATOR GRADE P91 STEEL COMPONENT WELD CREEP-ASSESSMENT | Grisolia O.; Conte A.L.; Scano L.; Piccini F.; De Agostinis M.; Fini S. | 2023-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| Tribological Behaviour in the Underhead for High Strength Socket-Head Screws Coupled With Cast Iron and Tightened in Dry and Lubricated Condition | Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Olmi, Giorgio; Scapecchi, Chiara; Vin...cenzi, Nicolò | 2023-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| VIBRATION LOOSENING PERFORMANCE OF ADDITIVELY-MANUFACTURED BOLTED JOINTS | Gerini-Romagnoli M.; De Agostinis M.; Nassar S.A.; Tedlapu K. | 2023-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL: EFFECTS OF POST-MANUFACTURE TREATMENTS | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric-Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | - | 4.01 Contributo in Atti di convegno | - |
| EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL | D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bog...ojevic | 2022-01-01 | - | INEGI-FEUP | 4.01 Contributo in Atti di convegno | - |