CRIS Current Research Information System

MELE, MATTIA

MELE, MATTIA  

DIPARTIMENTO DI INGEGNERIA INDUSTRIALE  

Ricercatori a tempo determinato  

Mostra records
Risultati 1 - 20 di 65 (tempo di esecuzione: 0.028 secondi).
Titolo Autore(i) Anno Periodico Editore Tipo File
An Experimental Study on the Fatigue Response of Hybrid Additively Manufactured 1.2343 Hot Work Steel - MARAGING Steel MS1 Croccolo, D.; Ciric-Kostic, S.; De Agostinis, M.; Fini, S.; Mele, M.; Bogojevic, N.; Sindelic, V.... espandi; Olmi, G. 2025-01-01 FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES - 1.01 Articolo in rivista -
Tribology of threaded joints: Sustainable lubricants Mele, M.; Olmi, G. 2025-01-01 - CRC Press, Taylor & Francis 2.01 Capitolo / saggio in libro -
A STUDY ON THE DEGRADATION OF PRE-APPLIED THREADLOCKERS UNDER EXTENDED EXPOSURE TO SEVERE HYGRO-THERMAL CONDITIONS Fini, S.; Croccolo, D.; de Agostinis, M.; Mele, M.; Olmi, G.; Scapecchi, C.; Tariq, M. H. B. 2024-01-01 - - 4.01 Contributo in Atti di convegno -
ANALYSIS OF THE TRIBOLOGICAL BEHAVIOUR OF TITANIUM FASTENERS UNDER DIFFERENT TIGHTENING STRATEGIES De Agostinis, M.; Croccolo, D.; Fini, S.; Mele, M.; Olmi, G.; Scapecchi, C.; Martini, J. 2024-01-01 - American Society of Mechanical Engineers (ASME) 4.01 Contributo in Atti di convegno -
Design of Special Equipment for the Mechanical Testing of Runway Light Fixtures Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecch... espandii, Chiara 2024-01-01 MACHINES - 1.01 Articolo in rivista Design-of-Special-Equipment-for-the-Mechanical-Testing-of-Runway-Light-FixturesMachines.pdf
Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments Fini, S.; Croccolo, D.; De Agostinis, M.; Olmi, G.; Paiardini, L.; Scapecchi, C.; Mele, M. 2024-01-01 PROGRESS IN ADDITIVE MANUFACTURING - 1.01 Articolo in rivista s40964-024-00712-y.pdf
Replacing non-renewable lubricants with vegetables oils in threaded joints Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Nassar S.; Olmi G.; Scapecchi C.; Khan M.Y.; Tari... espandiq M.H.B. 2024-01-01 JOURNAL OF ADVANCED JOINING PROCESSES - 1.01 Articolo in rivista 1-s2.0-S2666330924000505-main_published_compressed.pdf
Warpage evaluation and mechanical characterisation of modified polyamide-6 specimens produced by Arburg plastic freeformer Porcaro, Rita; Fontana, Francesco; Ciotti, Michele; Mele, Mattia; Pisaneschi, Gregorio; Campana, ... espandiGiampaolo; Zucchelli, Andrea; Fiorini, Maurizio 2024-01-01 PROGRESS IN ADDITIVE MANUFACTURING - 1.01 Articolo in rivista -
3D Printing Of A Cranial Implant With Energy-Absorbing Polymer Via Arburg Plastic Freeforming Technology Mele M.; Cercenelli L.; Pisaneschi G.; Fiorini M.; Zucchelli A.; Campana G.; Tarsitano A.; Marcel... espandili E. 2023-01-01 JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY - 1.01 Articolo in rivista -
AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecch... espandii, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan 2023-01-01 - INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial 4.01 Contributo in Atti di convegno -
Design and Optimization of a Pneumatic Clamping System for Direct-Driven Rotary Tables Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Canella G.; Gaspa C.; Vincenzi N. 2023-01-01 MACHINES - 1.01 Articolo in rivista machines-11-00207.pdf
Dimensional accuracy and impact resistance of 3D printed clay reinforced with scrap polymer powder Mele, Mattia; Campana, Giampaolo; Pisaneschi, Gregorio; De Martino, Luciano; Ricciarelli, Michele 2023-01-01 RAPID PROTOTYPING JOURNAL - 1.01 Articolo in rivista postprint_Claylon2.pdf
Effect of different underhead shot-peening and lubrication conditions on high-strength screws undergoing multiple tightenings Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G. 2023-01-01 TRIBOLOGY INTERNATIONAL - 1.01 Articolo in rivista 2023 - Effect of different underhead shot-peening and lubrication conditions on high-strength screws undergoing multiple tightenings -.pdf
Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Campana G. 2023-01-01 PROGRESS IN ADDITIVE MANUFACTURING - 1.01 Articolo in rivista 2023 - Effects of infill temperature on the tensile properties and warping of 3D-printed polylactic acid - Croccolo et al.pdf
Effects of short‐loop material recycling on mechanical properties of parts by Arburg Plastic Freeforming Mattia Mele,
Gregorio Pisaneschi,
Andrea Zucchelli,
Giampaolo Campana,
Maurizio Fiorini 		2023-01-01 PROGRESS IN ADDITIVE MANUFACTURING - 1.01 Articolo in rivista Int_2023_pubonline_2023_Effects of short‐loop material recycling_PIAM.pdf
Environmental drawbacks of lightweight design algorithms in material extrusion additive manufacturing: a case study Mele, Mattia; Pisaneschi, Gregorio; Ciotti, Michele; Campana, Giampaolo; Zucchelli, Andrea; Fiori... espandini, Maurizio 2023-01-01 JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING - 1.01 Articolo in rivista Int_2023_Environmental drawbacks of lightweight design_JBSMS&E.pdf
Evaluation of Competencies for a Sustainable Industrial Environment Campana, G.; Mele, M.; De Bortoli, L.; Cimatti, B.; Kobayashi, H. 2023-01-01 - Springer 2.01 Capitolo / saggio in libro Conf_Int_2023_GCSM_Slow_manufacturing_p836_844.pdf
Failure of Threaded Connections: A Literature Review Croccolo D.; De Agostinis M.; Fini S.; Mele M.; Olmi G.; Scapecchi C.; Tariq M.H.B. 2023-01-01 MACHINES - 1.01 Articolo in rivista -
FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardin... espandii, Luca; Scapecchi, Chiara 2023-01-01 - INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial 4.01 Contributo in Atti di convegno PDF-Book_20072.pdf
Leveraging Insights from Unique Artifacts for Creating Sustainable Products Zannoun, H.; Okorafor, J.; Asensio, T.; Guedes, G.; Badurdeen, F.; Wang, P.; Jawahir, I. S.; Camp... espandiana, G.; Mele, M.; Cimatti, B. 2023-01-01 - Springer 2.01 Capitolo / saggio in libro Conf_Int_2023_GCSM_Creating_Sustainable_Products_p1065_1073.pdf