The time of separation of a satellite from its launch vehicle often signs the beginning of its operational life in orbit and this is especially true for micro- and nano- satellites. To preserve the integrity and the efficiency of the spacecraft during launch and perform a correct separation capable to grant safe operations of the spacecraft in orbit, it is necessary to design and manufacture an efficient and reliable interface and separation system from the launch vehicle. The VEGA Qualification Flight (or Maiden Flight), originally planned to take place by end-2007, has now been postponed till the end of 2010 and several payloads will be released in orbit. First, a scientific payload named LARES will be released along a circular 1450x1450 km orbit, at 71° of inclination. Given the availability of further mass for payloads, ESA and ASI agreed on embarking a set of secondary payloads which will be released along an elliptic deorbiting trajectory, after the perigee of the upper stage will be lowered to about 350 km. The 10 secondary payloads include 9 Cubesats and ALMASat-1, the first microsatellite developed, manufactured and assembled in the Microsatellite Lab of the University of Bologna, Forlì Campus. ALMASat-1 flight opportunity was granted to the University of Bologna under the obligation that the S/C adapter and separation system was not to be provided by the Launch Vehicles (LV) but was part of the ALMASat-1 systems. This paper presents the activities that led to the design, manufacturing, verification and qualification of the ALMASat-1 separation system carried out at the Microsatellite Laboratory of the University of Bologna. The general architecture selected for the interface is the classical cylindrical canister adapter with a 2-clamps constraining system. This solution, common for micro- and nano- satellites, has a wide flight heritage, is typically simple and affordable and could be easily implemented for a wide range of launch vehicles. In order to reduce the power consumption and enhance the system reliability and safety, the release clamps will be retained by Non-Explosive electro-mechanical Actuators (NEA) that allow to preload two couples of springs, one pair for each clamp, until the separation signal is obtained by the LV avionics. Along with numerical simulations, experimental tests have been performed by means of a separation test-bed, specifically designed to reproduce the correct dynamics of both the separation system and the spacecraft. Finally, the structural and topological optimization process performed on the ALMASat-1 Adapter and Separation System will be presented, focusing on the reduction of the system overall mass which, in turns, determines the launch costs and represents one of the most critical aspect in microsatellite missions.

Design, Assembly and Verification of the ALMASat-1 Separation System / D. Bruzzi; A. Corbelli; P. Tortora. - ELETTRONICO. - (2010). (Intervento presentato al convegno Small Satellite Systems and Services Symposium tenutosi a Funchal, Madeira – Portugal nel 31 May–4 June, 2010).

Design, Assembly and Verification of the ALMASat-1 Separation System

TORTORA, PAOLO
2010

Abstract

The time of separation of a satellite from its launch vehicle often signs the beginning of its operational life in orbit and this is especially true for micro- and nano- satellites. To preserve the integrity and the efficiency of the spacecraft during launch and perform a correct separation capable to grant safe operations of the spacecraft in orbit, it is necessary to design and manufacture an efficient and reliable interface and separation system from the launch vehicle. The VEGA Qualification Flight (or Maiden Flight), originally planned to take place by end-2007, has now been postponed till the end of 2010 and several payloads will be released in orbit. First, a scientific payload named LARES will be released along a circular 1450x1450 km orbit, at 71° of inclination. Given the availability of further mass for payloads, ESA and ASI agreed on embarking a set of secondary payloads which will be released along an elliptic deorbiting trajectory, after the perigee of the upper stage will be lowered to about 350 km. The 10 secondary payloads include 9 Cubesats and ALMASat-1, the first microsatellite developed, manufactured and assembled in the Microsatellite Lab of the University of Bologna, Forlì Campus. ALMASat-1 flight opportunity was granted to the University of Bologna under the obligation that the S/C adapter and separation system was not to be provided by the Launch Vehicles (LV) but was part of the ALMASat-1 systems. This paper presents the activities that led to the design, manufacturing, verification and qualification of the ALMASat-1 separation system carried out at the Microsatellite Laboratory of the University of Bologna. The general architecture selected for the interface is the classical cylindrical canister adapter with a 2-clamps constraining system. This solution, common for micro- and nano- satellites, has a wide flight heritage, is typically simple and affordable and could be easily implemented for a wide range of launch vehicles. In order to reduce the power consumption and enhance the system reliability and safety, the release clamps will be retained by Non-Explosive electro-mechanical Actuators (NEA) that allow to preload two couples of springs, one pair for each clamp, until the separation signal is obtained by the LV avionics. Along with numerical simulations, experimental tests have been performed by means of a separation test-bed, specifically designed to reproduce the correct dynamics of both the separation system and the spacecraft. Finally, the structural and topological optimization process performed on the ALMASat-1 Adapter and Separation System will be presented, focusing on the reduction of the system overall mass which, in turns, determines the launch costs and represents one of the most critical aspect in microsatellite missions.
2010
Proceedings of the Small Satellite Systems and Services Symposium
Design, Assembly and Verification of the ALMASat-1 Separation System / D. Bruzzi; A. Corbelli; P. Tortora. - ELETTRONICO. - (2010). (Intervento presentato al convegno Small Satellite Systems and Services Symposium tenutosi a Funchal, Madeira – Portugal nel 31 May–4 June, 2010).
D. Bruzzi; A. Corbelli; P. Tortora
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/91969
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact