This paper presents the experimental work and the results obtained from the implementation of a transient fuel compensation algorithm for the 6.0-liter V12 high-performance engine that equips the Lamborghini Diablo vehicles. This activity has been carried out as part of an effort aimed at the optimization of the entire fuel injection control system. In the first part of the paper the tests for fuel film compensator identification are presented and discussed. In this phase the experimental work has been conducted in the test cell. An automatic calibration algorithm was developed to identify the well-known fuel film model X and τ parameters, so as to define their maps as a function of engine speed and intake manifold pressure. The influence of engine coolant temperature has been investigated separately; it will be soon presented together with the air dynamics compensation algorithm. In the second part of the paper, the performance of the fuel dynamics compensation algorithm is analyzed. The measured Air-Fuel Ratio (AFR) distribution, especially during selected portions of the USA driving cycle, has been chosen as a yardstick to evaluate the performance improvement of the new injection control strategy. The experimental tests have been conducted using Lamborghini's chassis dynamometer laboratory. The comparison between the AFR values, measured before and after the introduction of the new strategy using a linear oxygen sensor, clearly shows the efficiency gain in terms of AFR control due to the transient fuel compensation algorithm. Copyright © 2001 Society of Automotive Engineers, Inc.

Implementation of fuel film compensation algorithm on the Lamborghini diablo 6.0 engine

Cavina N.;Minelli G.;
2001

Abstract

This paper presents the experimental work and the results obtained from the implementation of a transient fuel compensation algorithm for the 6.0-liter V12 high-performance engine that equips the Lamborghini Diablo vehicles. This activity has been carried out as part of an effort aimed at the optimization of the entire fuel injection control system. In the first part of the paper the tests for fuel film compensator identification are presented and discussed. In this phase the experimental work has been conducted in the test cell. An automatic calibration algorithm was developed to identify the well-known fuel film model X and τ parameters, so as to define their maps as a function of engine speed and intake manifold pressure. The influence of engine coolant temperature has been investigated separately; it will be soon presented together with the air dynamics compensation algorithm. In the second part of the paper, the performance of the fuel dynamics compensation algorithm is analyzed. The measured Air-Fuel Ratio (AFR) distribution, especially during selected portions of the USA driving cycle, has been chosen as a yardstick to evaluate the performance improvement of the new injection control strategy. The experimental tests have been conducted using Lamborghini's chassis dynamometer laboratory. The comparison between the AFR values, measured before and after the introduction of the new strategy using a linear oxygen sensor, clearly shows the efficiency gain in terms of AFR control due to the transient fuel compensation algorithm. Copyright © 2001 Society of Automotive Engineers, Inc.
2001
Proceedings of the SAE 2001 World Congress
1
8
Cavina N.; Minelli G.; Ceccarani M.
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/880495
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 5
  • ???jsp.display-item.citation.isi??? ND
social impact