Poly(hexane dodecanoate)-based random copolyesters containing ether linkages have been subjected to contact with food simulant liquids and thermal and photoageing. Gas permeability, thermal and mechanical properties have been analyzed after each treatment, and the results obtained have been compared with low-density polyethylene films. The results showed that the gas barrier behavior was highly influenced by the polymer chemical composition. The contact with simulant liquids and the ageing treatments induced an increase in the crystallinity degree, together with a decrease in the molecular weight. This caused an increment of the elastic modulus and a decrement of the elongation at break.

Gas Barrier and Thermal Behavior of Long Chain Aliphatic Polyesters after Stressed Treatments / Gigli, Matteo; Genovese, Laura; Lotti, Nadia; Munari, Andrea; Dalla Rosa, Marco; Siracusa, Valentina. - In: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING. - ISSN 0360-2559. - ELETTRONICO. - 56:1(2017), pp. 71-82. [10.1080/03602559.2016.1211686]

Gas Barrier and Thermal Behavior of Long Chain Aliphatic Polyesters after Stressed Treatments

GIGLI, MATTEO;GENOVESE, LAURA;LOTTI, NADIA;MUNARI, ANDREA;DALLA ROSA, MARCO;SIRACUSA, VALENTINA
2017

Abstract

Poly(hexane dodecanoate)-based random copolyesters containing ether linkages have been subjected to contact with food simulant liquids and thermal and photoageing. Gas permeability, thermal and mechanical properties have been analyzed after each treatment, and the results obtained have been compared with low-density polyethylene films. The results showed that the gas barrier behavior was highly influenced by the polymer chemical composition. The contact with simulant liquids and the ageing treatments induced an increase in the crystallinity degree, together with a decrease in the molecular weight. This caused an increment of the elastic modulus and a decrement of the elongation at break.
2017
Gas Barrier and Thermal Behavior of Long Chain Aliphatic Polyesters after Stressed Treatments / Gigli, Matteo; Genovese, Laura; Lotti, Nadia; Munari, Andrea; Dalla Rosa, Marco; Siracusa, Valentina. - In: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING. - ISSN 0360-2559. - ELETTRONICO. - 56:1(2017), pp. 71-82. [10.1080/03602559.2016.1211686]
Gigli, Matteo; Genovese, Laura; Lotti, Nadia; Munari, Andrea; Dalla Rosa, Marco; Siracusa, Valentina
File in questo prodotto:
Eventuali allegati, non sono esposti

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/588272
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 6
social impact