This paper presents a novel method for battery-less circuit start-up from ultra-low voltage energy harvesting sources. The approach proposes for the first time the use of a Piezoelectric Transformer (PT) as the key component of a step-up oscillator. The proposed oscillator circuit is first modelled from a theoretical point of view and then validated experimentally with a commercial PT. The minimum achieved start-up voltage is about 69 mV, with no need for any external magnetic component. Hence, the presented system is compatible with the typical output voltages of thermoelectric generators (TEGs). Oscillation is achieved through a positive feedback coupling the PT with an inverter stage made up of JFETs. All the used components are in perspective compatible with microelectronic and MEMS technologies. In addition, in case the use of a ∼40 μH inductor is acceptable, the minimum start-up voltage becomes as low as about 32 mV.

A 32 mV/69 mV input voltage booster based on a piezoelectric transformer for energy harvesting applications / Camarda, Antonio; Romani, Aldo; Macrelli, Enrico; Tartagni, Marco. - In: SENSORS AND ACTUATORS. A, PHYSICAL. - ISSN 0924-4247. - STAMPA. - 232:(2015), pp. S092442471530011X.341-S092442471530011X.352. [10.1016/j.sna.2015.05.014]

A 32 mV/69 mV input voltage booster based on a piezoelectric transformer for energy harvesting applications

CAMARDA, ANTONIO
;
ROMANI, ALDO;TARTAGNI, MARCO
2015

Abstract

This paper presents a novel method for battery-less circuit start-up from ultra-low voltage energy harvesting sources. The approach proposes for the first time the use of a Piezoelectric Transformer (PT) as the key component of a step-up oscillator. The proposed oscillator circuit is first modelled from a theoretical point of view and then validated experimentally with a commercial PT. The minimum achieved start-up voltage is about 69 mV, with no need for any external magnetic component. Hence, the presented system is compatible with the typical output voltages of thermoelectric generators (TEGs). Oscillation is achieved through a positive feedback coupling the PT with an inverter stage made up of JFETs. All the used components are in perspective compatible with microelectronic and MEMS technologies. In addition, in case the use of a ∼40 μH inductor is acceptable, the minimum start-up voltage becomes as low as about 32 mV.
2015
A 32 mV/69 mV input voltage booster based on a piezoelectric transformer for energy harvesting applications / Camarda, Antonio; Romani, Aldo; Macrelli, Enrico; Tartagni, Marco. - In: SENSORS AND ACTUATORS. A, PHYSICAL. - ISSN 0924-4247. - STAMPA. - 232:(2015), pp. S092442471530011X.341-S092442471530011X.352. [10.1016/j.sna.2015.05.014]
Camarda, Antonio; Romani, Aldo; Macrelli, Enrico; Tartagni, Marco
File in questo prodotto:
File Dimensione Formato  
PP A 32mV-69mV input voltage.pdf

Open Access dal 28/05/2017

Tipo: Postprint
Licenza: Licenza per Accesso Aperto. Creative Commons Attribuzione - Non commerciale - Non opere derivate (CCBYNCND)
Dimensione 5.25 MB
Formato Adobe PDF
5.25 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11585/521447
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 22
  • ???jsp.display-item.citation.isi??? 19
social impact